|
|
|
| VAG-CAN + K Commander Software version 5.0 |
For all customers who want to buy the VAG CAN +K COMMANDER Software must pay attention to this, that the original software version for the moment is 5.0 but not 6.0 or 7.0, these are fake chinese software copies of our original software and they do not work.
!!! NEW NEW NEW NEW NEW !!!
EDC 16/MED9x(petrol/diesel) PIN CODE READING, KM/Mileage correction via OBD II till 2008
Must be ordered as a new software module - AN012 |
VAG-CAN COMMANDER Software is developed to work with the new and old models of Volkswagen, AUDI, SEAT, SKODA and Porsche Cayenne cars equipped with K-Line and CAN communication System from 1995 year to nowadays. With this software you can read the security pin code, change the mileages and kms on all these models, program new keys and do complete diagnostic. The software works with the special CAN interface which are sold as package.
Functions of the VAG COMMANDER Software:
-
Features:
- Full diagnistic activities CAN TP2.0, CAN TP1.6, KW1281, KW2000
- Autoscan of all units using CAN TP2.0, CAN TP1.6, KW1281 and KW2000
- Covers all electronic control units in the vehicles (CAN-TP2.0).
- Manual definition of running diagnostic session.
- Broadcast diagnostic request – disable normal communication, clear DTCs, Logistic (transport) mode,.....
- Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Supported is also adaptation of a KESSY unit to the vehicle (K/CAN/Porsche-CAN)
- Most of popular diagnostic requests – identifications, coding, adaptations, DTCs, measured values, basic setting, and s.o. Functions are under CAN-TP2.0.
- Special function - odometer correction in instrument clusters and EDC15x by OBDII.
- Special function - READING EDC16x EEPROM by OBDII
- Special function - Reading/Writing odometer in EDC16x by OBDII
- Special function - Reading Security Access Code/Login WFS from EDC16x by OBDII
- Special function - Reading Security Access Code/Login WFS from MED 9.x by OBDII
- Special function - read Security Access Code/Login WFS.
- Special function - read/program immobilizer data stored in the immobilizer.
- Special function - programming immobilizer data stored in the EEPROM of EDC16 and MED9x by OBDII.
- Special function - programming reflashing counters stored in the EEPROM of EDC16 by OBDII. Now supported EDC16CP34 VW Touareg!
- Special function - read/write EEPROM from instrument cluster/immobilizer. Now is covered also Audi A4 BOSCH RB8 Crypto cluster, VW Touareg 2007/2008 CAN, VW Phaeton 2008 CAN, Porsche Cayenne 2008 CAN, Bentley Continental 2008 CAN !
- Special function - VAG MMI TV Activation - now covers year 2007.
- Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche.
- Special function - Key learning. Can be programmed key to Audi A8, Audi A3, Skoda Octavia II (2007+), VW Touareg 2007/2008, VW Phaeton 2008, Bentley Continental 2008, Porsche Cayenne 2008 independed from component security protection! Allowed is direct connection with HITAG-2 programmer.
- Special function - Airbag units - Read/Write EEPROM by diagnostic! Clearing crash data! All VW/Audi/Seat/Skoda-Bosch/Siemens airbag modules up to year 2005
- Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..
- Special function - Read / Write flash memories EDC16x, EDC15x, ME7x, MED9x, PPD1.x (EDC16 - checksum calculations while programming
- Special function - Read / Write of reflashing counters stored in the EEPROM of EDC16 by OBDII (now not possible to be detected that your engine control unit is reflashed! ADDITIONALY NOW YOU CAN SET FLASHTOOL NUMBER TO ANY VALUE!
- Special function - Calculators by dump of EEPROM - KESSY - security code, SIMOS PPD1.4/1.5 security code, Skoda Fabia, Skoda Roomster, VW Polo, Seat Ibiza 93C86 CRYPTO; EDC16 odometer correction/checksums; GATEWAY 95160 - odometer correction; MED9x checksums; ....
- Special function - programming dashboards from VW/SEAT/SKODA (CAN) and AUDI A3 (CAN) in VIRGIN status - FREE FOR ALL OWNERS OF "IMMO PANNEL".
- Special function - programming dashboards from VW/SEAT/SKODA/AUDI (K) 93C86 and AUDI A4 RB4 BOSCH in VIRGIN status - so will not need anymore from PIN code for the adaptaton - FREE FOR ALL OWNERS OF "K update instrument cluster".
Models covered>>>
Download User manual
ATTENTION: Starting from V5.0 all updates from previous versions are caried through the "VAG K+CAN Update Request" tool. It is available in the V4.1 package or is available for download here .
Just put the dongle and the interface and start the tool.
Then enter your name, e-mail, interface number and press the "request" button.
A file will be generated in the folder where the tool is placed. Please send the file to our e-mail or accept the question for automatic sending.
You can choose one of the packages we offer here or you can build your own package from the updates bellow:
In order to make your configuration of the VAG K+CAN COMMANDER, first you must always purchase the BASE VERSION INTERFACE in every package you want to order.
 
FULL PACKAGE: 5000 EUR Buy now 5000 EUR
BASE VERSION INTERFACE - AN001 - BASE: 300 EUR Buy now 300 EUR
Updates to the basic package:
AN002 - Odometer by CAN - 250 EUR
- Odometer correct CAN based cars Buy now 250 EUR
AN012 - EDC16x/MED9.x-odometer/PIN EEPROM - 1500 EUR
- EDC16/MED9x - Read EEPROM/ Read odometer/Change odometer/ Securiy Access Code
Buy now 1500 EUR
AN003 - PIN by CAN- 500 EUR
- Security code reading (CAN) / Read/Write EEPROM memory of instrument clusters/immobilizers
Buy now 500 EUR
AN004 - IMMO data immobilizer - 250 EUR
- Pannel for programming IMMO data (PIN code/VIN and s.o. in immobilizer), availability to reset instrument cluster/immobilizers from VW/SEAT/SKODA-CAN and Audi A3-CAN to VIRGIN state
Buy now 250 EUR
AN005 - IMMO data ECU, Pannel for programming IMMO data (PIN code/VIN and s.o. in EDC16)*- 250 EUR
-data is stored inside of EEPROM memory of ECU - EDC16x
-data is stored inside of EEPROM memory of ECU - MED9x
*Note: options for programming of immo data must be with the option "security code reading (CAN)"
Buy now 250 EUR
AN006 - Odometer/PIN by K-line - 300 EUR
- K-line UPDATE - Odometer correct / Security code reading / Read/Write EEPROM of instrument cluster/immobilizer
Buy now 300 EUR
AN007 - Read/Write EEPROM ECU - 250 EUR
- Read/Write EEPROM of Engine Control Units Buy now 250 EUR
AN008 - Read/Write flash/counters ECU - 200 EUR
- EDC16x Read/Write counters for flashing stored in the EEPROM ST95320 by 250 OBDII
- EDC16 all types Read/Write Flashmemory via OBDII (K and CAN)
- Calculation of checksums while programming
Buy now 200 EUR
AN009 - Key learning - 1000 EUR
- Key learning function
Buy now 1000 EUR
Buy now 100 EUR
AN011 - TV Activation - 200 EUR
- VAG MMI TV Activation - A6,A8,Q7 now covers 2007!
Buy now 200 EUR
AN013 - HITAG2 Programmer - 450 EUR
- HITAG-2 transponder/key programmer
Buy now 450 EUR |
BMW Commander 1.1
Diagnostic tool for BMW (E6x, E70, E8x, E9x)
|
Features:
- Connecting with all electronic control modules in the vehicle.
- For all electronic control units reading identification data, sw/hw versions, user information fields.
- For all electronic control units read and clear error (DTCs) memories - standart, shadow, history memory.
- Possibility to read/program memory of electronic control units (including CAS modules) - this will allow you aligning identification data in an used units.
- Synchronization DME/DDE and CAS
- Special function - Program vehicle ID, Read/Write units Memory
Full package: 1450 EUR Buy now 1450 EUR
Basic package (identification,error memory, synchronization, program ID) - 800 EUR
Buy now 800 EUR
Sofware update for "Memory manager" (except CAS) - 400 EUR Buy now 400 EUR
Software update for "CAS E65" (odometer correction, eeprom R/W, key coding) - 250 EUR
Buy now 250 EUR
Note:
* Base interface need to be in your configuration in every case |
Motorola/Freescale MC912-9S12-9S12(Xgate) in-circuit Programmer |
 |
| Authorized dealer for this programmer |
List of all car models covered for in-circuit programming by the programmer
• BMW 1,3,5,6 Series CAS2 White (9S12)
• BMW 1,3,5,6,X5 Series CAS3 Black (9S12)
• BMW 1,3,5,6,X5 Series CAS3 Black ( 9S12X )
• BMW 7 Series CAS 2002 (HC12)
• BMW 7 Series CAS 2005 facelift (9S12)
• BMW X3/X5 EWS4 (9S12) incl. 2007 version !!!New!!! (editing of EWS4's 9S12D64 now works)
• Ford Mustang 2007 (9S12) !!!New!!!
• Landrover Freelander 2002 (HC12)
• Landrover Freelander 2004 (HC12)
• Mercedes A-Class 2004 Key Module (9S12)
• Mercedes C/CLK C209 ZGW (9S12) **
• Mercedes E/C W211 Key Module (HC12) **
• Mercedes E/C/CLK/SLK W211 Key Module (9S12) **
• Mercedes ML/R W164 Key Module (9S12) **
• Mercedes S/SL EZS R230 (9S12) **
• Mercedes Sprinter 2007 EZS (9S12) !!!New!!!
• Mini One/Cooper Dashboard (HC12)
• Mini One/Cooper Dashboard NAVI (HC12)
• Mini One/Cooper EWS4 (9S12)
• Mini One/Cooper CAS3 Black ( 9S12X )
• Volkswagen Crafter 2007 EZS (9S12) !!!New!!!
** - NOT for new NEC based modules (Amazonas, Havanna, Palermo, Spanien).
|
R260S Programmer can program the Motorola/Freescale 68HC912/MC912/MC9S12
microcontroller families, including the latest MC9S12X XGATE-based processor family. The
system works as a in-circuit programmer, no needs to remove the chip from the target board nor
lifting any pin. It connects to the board via serial connection by using only few wires and it works
with secured chips, too. No matter if it is secured or not! |
IMPORTANT!!! This interface can program any board that uses a HC12 , 9S12 or 9S12X series Motorola/Freescale secured and nonsecured microcontroller |
!!!!!!! THIS IS THE ORIGINAL and MOST RELIABLE ONE !!!!!!!!
Be aware that some competitors are providing copies of this tool without the automatic learning algorithm making them really unsafe. Use them at your own risk!
Price – 2100 EUR (incl. VAT)
Buy now 2100 EUR
|
|
Hi Tag 2 Programmer and key generating tool V4.0 |
|
PCF7936/7942/7944/7946 - password and cipher mode programmer. The Programmer can read and copy transponders known as Hi Tag 2, integrated in the new car models after 2003 year, all these transponders are in the keys of new vehicles like BMW, VW, Audi, Porsche, OPEL, SAAB, Peugeot, Citroen, Mitsubishi and so on . The programmer can work in password and cipher mode.
NEW NEW NEW NEW NEW NEW
The new function added to the The High Tag 2 programmer is the key programming for new series for BMW cars like 1(E87), 3(E90/E91/E93), 5(E60/E61), 6(E63/E64), 7(E65/E66), Z4(E85/E86), new X5(E70) and programming transponders for EWS 2, 3/3+ and 4. The programmer works with original keys as well as with High Tag 2 chips produced from Philips company. Now you can read/write data stored inside of the key like Identification number and mileages/km! In order to program a key or transponder, first you must read the memory/eeprom/dump of the processor in the immobilizer(EWS, CAS or KESSY module) of the car and then you load it to the programmer and program the new key, after that you save the new file and write it back to the processor. To be able to use this new function, you will have to buy our special programmer for processors MC68HC912 and 9S12 for CAS modules.
Another new function of the Hi Tag 2 Programmer is generating transponder key to start the vehicle from dump for NEW AUDI A8, VW Touareg, VW Phaeton, Porsche Cayenne and Bentley Continental and preparing an original transponder for programming with diagnostic equipment.(this function is available only if you buy the full package)
Full package price: 2500 EUR Buy now 2500 EUR
Senior package price: 2000 EUR Buy now 2000 EUR
|
|
|
Transpronics - the best professional transponder duplicating and transponder generating machine - 2000 EUR |
The machine is designed and made especially to help the immobilizer system specialists involved in the range of the auto key programming .
Transpronics is not only a duplicating machine, it is also an unique device that can generate transponders from eeproms in the immobilizer boxes and ECU's even when all keys are lost or you want to program a new one. It will also show you the bytes written in the Immobilizer eeprom when you read the key with Transpronics which will help you to write direct in th eeprom the key info and start the car.
The machine is working with our precoded transponders which are prepaired from us and you can buy as many as you want. The price of one precoded transponder is 10 EUR. There are available precoded transponders Philips Crypto for ID41-44-45, MEG/CRY ID48 and PCF7935.
Transpronics also can tell you if the transponder is locked or not. Also you can unlock the already used ID48 transponders.
This professional device can copy most crypto transponders like ID 42 and 45, 4D(Tex/Cry), most of 44 VAG Group and some ID40 and ID41 transponders.
Moreover, it can also copy Texas fixed transponders to TPX1 made by JMA company which works without battery in the copy transponder head. |
The Gambit programmer is mainly produced for programming RFID transponders and generating RFID transponders from the immobilizer dump/eeprom of the car, in order to be able to start the vehicle. This is a genuine one and not a chinese copy.
Gambit programmer works with PCF7935, PCF 7936 and T5 transponders which are not precoded and are completely blank.
For support and sales in english, please, contact on our e-mail or telephone numbers.
For support in russian, please, click here |
| Full package price: 1350 EUR |
 Buy now 1350 EUR
Key programming tester comes with one year guarantee
|
|
|
is the most powerful and best tool for fixed and crypto transponder key programming in the World. With the help of this tool you can easily program new and original transponder keys, remote controls and immobilizers ECU’s. This is the perfect tool for every automechanic and autolocksmith involved in auto key programming and diagnostics. Discounts appears for ordering more than one unit.
KEY PROG - full software version now is 5.21
NEW NEW NEW NEW NEW NEW NEW NEW
promotional fee of 300 EUR Now all customers who has bought the original AD100 or T-CODE from Advanced-Diagnostics and ELME TOOLS can also make an online update from our server after you pay the with your original password and serial number. You will get an username from us and then you will make your update. Once you start updating your unit from our server after that you can always update again from the Advanced Diagnostic server but then you will only get the software that you have paid for to Advanced Diagnostics or ELME TOOLS. You should think about it because it is much better to pay the for full software version than to pay thousands of euros for getting new software from AD. Also you can always go back to your original status!
To get more info about the update like username and password and payment details, please, send an e-mail to info@vag-info.com or call 00359/ 888/ 212767
Now you can buy our special software version for KeyProg just for 500 EUR which will show you on the tester screen the Incode and Outcode needed for reading the pin code of OPEL/VAUXHALL cars with petrol engine ECU's.
Buy now special Key Prog software for 500 EUR
! ! ! IMPORTANT MESSAGE! ! !
For all customers who want to update their T300, Automam/Automan, AD100 and T-CODE units. Be carefull when you getting the update loader.exe file. Advanced Diagnostics has made copies of all our websites and advertize them on the Internet and it is said on them that the updating of the units is free and you can download the Loader.exe and software for free. Do not use this loader to update your machines because they put a virus in it and your machine will stop. If you really want to update your machine then write us an e-mail or call us to get your username and password to update your machine but only after you pay the fee. Do not make free update on the Internet!!!
! ! ! IMPORTANT MESSAGE! ! !
Models covered:
- Chrysler / Jeep / Plymouth
- Peugeot
- Daewoo / Chevrolet
- Fiat / Alfa / Lancia
- Ford
- Ford USA / Mercury / Lincoln
- General Motors / Vauxhall / Opel - Pin Code reading of early models and Corsa C, Tigra B and Meriva, Astra G, Zafira A, Vactra B
- Honda / Acura
- Hyundai - 6 digits pin code generator after 2000 year
- Iveco
- Jaguar
- Kia - 6 digits pin code generator after 2000 year
- Land Rover
- Mazda
- Mitsubishi
- Nissan / Infinity
- Citroen
- Proton
- Renault
- Rover
- Subaru
- Suzuki
- Toyota / Lexus
- VW / Audi / Seat / Skoda - Pin Code reading of VAG models till 2006 year
PROMOTIONAL PRICE: 1000 EUR (including all cables and full software)
If you buy 5 or more than 5 Key Prog machines then the price will be 800 EUR
Buy now 1000 EUR
|
| PIN codes reading software |
|
For all customers who has bought the PIN Reader Software must register with the dongle/cable serial number and usable e-mail, in order to be able to visit and register to our server for future online updates and visiting our customer area |
More Info>>>
|
|
Kombiinstrument / Immo box reader and programmer, OPEL Airbag reseting and VAG kilometers programm and change via OBD II connector! You can choose USB or COM 1 port connection to OBD II port! Works on any computer with Windows installed. Car models covered by Pin Reader software:
- VW GOLF IV VDO 1998-2005
- VW GOLF IV Bosch/MotorMeter petrol/diesel ECU – 2001-2005
- VW GOLF IV, BORA/JETTA, PASSAT Motor Meter - 1997-2000
- VW PASSAT VDO B4, B5 & B6 1998-2005
- VW PASSAT Bosch/MotorMeter petrol/diesel – 2001-2005
- VW BORA - JETTA VDO 1998-2005
- VW BORA - JETTA Bosch/MotorMeter petrol/diesel – 2001-2005
- VW POLO VDO 2002-2006
- VW BEETLE Magnetti Mareli 1998-2005
- VW T5 petrol/diesel - 2003-2006
- SKODA OCTAVIA Motor Meter - 1997-2005
- AUDI A3, A4, A6, TT 2000+ & TT USA Magnetti Mareli
- AUDI A3 VDO 1997-2003
- AUDI A4 VDO 1998-2005
- AUDI A4 Bosch/MotorMeter dashboard petrol/diesel 2001-2005
- AUDI A4, A6, A8 External Immo Box (system 1) 1995-1998
- SKODA FABIA VDO 2000-2006
- SKODA OCTAVIA VDO 1997-2005
- SKODA OCTAVIA Bosch/MotorMeter petrol/diesel ECU – 2001-2005
- KIA/HUYNDAI – 6 digits pin code calculator from VIN number for models after 2000
- OPEL AIRBAG RESETING OF CRASH DATA IN AIRBAG – 1996-2004. It can be ordered as a package with PIN Reader or separately
PIN READER - for VAG, OPEL Airbag reset crash data and Kia/Huyndai 6 digits pin code calculator from VIN, KM change and Eprom writing function for VAG group) - 300 EURO
Buy now 300 EURO
PIN READER - for VAG, OPEL pin code reading (Corsa C and Meriva), key programming and Airbag reset crash data, Kia, Huyndai 6 digits pin code calculator from VIN and KM change and Eprom writing function for VAG group – 600 EURO
Buy now 600 EUR
PIN READER - for VAG,OPEL pin code reading (Corsa C, Meriva and Agila), key programming and Airbag reset crash data, Kia, Huyndai 6 digits pin code and KM change and Eprom writing function for VAG group and Renault Megane(Scenic) pin reading and key programming 1999-2003 – 850 EURO
Buy now 850 EUR
|
|
|
Volkswagen, AUDI, SEAT and SKODA CAN System Key Programming Device |
NEW NEW NEW NEW NEW NEW
The device can program new keys to the new VW models fitted with CAN system from 2005 to 2007 year like GOLF V, Touran, Skoda Octavia II, CADDY, Seat Leon, VW EOS, VW Individual, VW Crossgolf, New VW Passat B6 platform (known like B7), VW Jetta MY2006, Skoda Roomster, Skoda Scout, Seat Altea XL Seat Toledo and Seat Altea after 2005. The Device will read and automatically insert the immobiliser pin code needed for the key programming. The Device will not work on GOLF V with Visteon - dashboard. Reading of the pin code and entering it in the immobiliser is done for 2 seconds. The time to accept the key and the immobiliser lamp to go off is 5 minutes. This time for accepting the key is originaly made by VAG factory to all their cars except AUDI models.
NEW NEW NEW NEW NEW NEW
The Device can also program keys to New AUDI A3 model from 2003 till 2007. The new function of this device is that you can program one preprogrammed transponder for each model of VAG Group direct to the immobilizer for 2 seconds and start the car and bring it to your garage for programming more keys and give the new keys to the customer. You can prepair for yourself with the Device one preprogrammed transponder for each model from VAG Group – VW, AUDI, SEAT and SKODA.
NEW NEW NEW NEW NEW NEW
Buy now 3600 EUR
PROMOTIONAL PRICE: 3600 EUR |
 
|
|
|
|
|
|
|
VAG key programmer and Immobilizer bypass
of petrol and diesel(EDC 15) via OBD II - 1996-2006 |
This Device can read the pin code(without showing it), program new keys and start the car for models from 1996 to 2000 and bypass the immobilizer of petrol>1.8 and diesel (EDC15) models and program new keys for models from 2001 to 2006. After you bypass the immobilizer then you can bring the car back to normal with fuctional immobilizer. |
 
Models covered - HERE
On promotion – 1099 EUR
Buy now 1099 EUR |
|
|
|
OPEL immobilizer PIN code reading (Corsa C, Meriva and Agila)
key programming and airbag reseting |
 |
|
 |
|
|
|
OPEL immobilizer PIN code reading and airbag reseting of crash data in all airbag modules/ECU via OBD II. It can be ordered as a package with VAG PIN reader.
OPEL Pin code reading(Corsa C, Meriva and Agila), key programming and AIRBAG reset crash data via OBD II - 350 EURO
Buy now 350 EUR
|
|
|
|
|
|
|
| Renault Megane and Scenic 8 digits PIN code 1999-2003 |
Reading immobilizer PIN code and key programming on Renault Megane and Megane Scenic modules with UCBIC (BSI) module from 1999 to 2003 year via OBD II. This software can also be ordered as a package together with VAG PIN reader
- Renault Megane - 1999 to 2003
- Renault Megane Scenic - 1999 to2003
PIN READER - for Renault Megane and Megane Scenic 1999-2003 - 350 EURO
Buy now 350 EUR
|
|
| Renault 4 digits PIN code generator |
 Software for generating of 4 digits immobilizer PIN code for Renault cars from the number written in the key fob (remote control) - 150 EURO.
Buy now 150 EUR
|
| |
|
| BMW
key programming device for EWS 2, 3 and 3+ |
|
BMW key programming device for vehicles equiped with EWS 2 module with processor masks 2D47J and EWS 3/3+ module with processor masks OD46J, coverage E46, E38, E39, E53(X5), X3(early models), Z3, Range Rover 2002+, MINI COOPER till 2006. The device does not work on EWS 3 module with processor mask 2D47J, due to security reasons . With this device you can program 8 keys in the EWS 2 and 3/3+ module. Another feature of the device is to erase the old and lost keys, add new keys on whatever position you want from 0 to 7 as you leave the existing keys working. You can program new keys when all keys are lost or stolen. The old keys will still work and you can order another key from the dealer beside the number of the new already programmed keys. To be able to program/add new key, you must use our special transponder made for the key programming or the original BMW keys made ready for programming with the Device. The Device comes with 5 transponders for EWS 2 and 5 transponders for EWS 3/3+. With this device there is no need of a PC or power supply. All the power you need is the 9 Volts battery that you must put inside the device. There is no need of desoldering the processor, all you have to do is to clip the device onto the processor and press the little black button and the key/transponder will be programmed for 5 seconds.
!!! NEW !!! NEW !!! NEW !!! NEW !!! NEW !!!
For all customer who want to buy and already bought The EWS 2, 3 and 3+ device, we arrange one day course at the price of 1500 EUR where you will learn all about BMW EWS Imobilizer system, how to program new keys without disoldering the processor for 5 seconds, how to define all 10 keys in the EWS module, how to release and ban keys in the EWS module, how to change the mileages/km and ID number and how to make an adaptation to the DME/DDE even if you have a second hand EWS module from the scrap yard.
The price of the course doesn't include the device price but if you pay for the course then you can buy the device at the price of 500 EUR and pay a package priceof 2000 EUR.
For all customers who have bought the BMW Device, now they can order original BMW Remote (Diamond Shape) keys with 2 track and 4 track canals and BMW nonremote keys with lamp 4 tracks like HU58BSP, ready to program them with BMW Key Device. Also available BMW Remote(Diamond shape) key casings, 2 track and 4 track .
The eight DIP swithches are used for programming keys on the different positions from 0 to 7
|
|
|
BMW key programming device & software
for E65 / E66 (new 7-th series from 2003 year) via OBD II – 3200 EUR
Buy now 3200 EUR |
|
 |
 
|
|
TOYOTA KEY PROGRAMMING DEVICE
| The device program key for 3 seconds
tested on Land Cruiser 2002 +, RAV 4 2002 +, PRADO, HIACE, Hilux and Lexus LX 470. The device works with original transponders only! – 1800 EUR |
Buy now 1800 EUR
|
  |
|
Porsche Cayenne(K-Line), VW Phaeton & VW Touareg (Petrol models)
key programming device via OBD II |
|
|
Porsche Cayenne 2004 - 2008 and VW Touareg 2008(petrol) CAN System Key programming device
| With this device you do not need the immobilizer pin code and you can program original remote keys or our transponders prepared for the key programming. The device can work on all Porsche Cayenne and new VW Touareg cars equipped with CAN System. The device will not work on cars equipped with SIEMENCE SDI type of ECU. |
|
 
|
Mercedes BENZ key programming device & software
|
|
!!! NEW NEW NEW NEW NEW !!!
"Mercedes BENZ Infra Red key programmer 1998-2006"
This new device can program new and used Infra red plastic keys and repair the not working keys which stop operating after some years of using them! With the software and hardware you can switch the keys in different mode like from the big old shape plastic key to operate like the new shape small plastic key! New updates will be releaed when we make them!
We can also program a new key for you if you send us the EZS(EIS - key module).
!!!!!!!! THIS IS NOT A CHINESE DEVICE AND SOFTWARE!!!!!!!
On promotion - 5000 EUR
Buy now 5000 EUR |
Mercedes
BENZ key programming device & software |
|
|
| Mercedes
BENZ key programming device & software NEW DEVICE |
 The new Mercedes Benz Key Programming Device for the models ML and A KLASS from 1998 to 2005 with the metal key(not the plastic electronic key) can now program all 8 keys in the Immobilizer. The Device program/add new keys without erasing the existing keys. You can program/add up to 8 new keys. The programming is done via the diagnostic plug OBD II. For programming you must use our special transponder, specially made for the key programming and to choose on which position you want to program the new key or keys with the help of the DIP switches built into the device . The programming is done for 8-10 seconds. With the device you can also program original keys ordered from the dealer.
Buy now 1200 EUR
|
|
|
|
UNIVERSAL MERCEDES BENZ TRANSPONDER FOR KEY PROGRAMMING
Buy now 50 EUR
Buy 5 chips for 250 EUR(490 BGN) Buy 10 chips for 450 EUR(882 BGN)
The transponder is ready to program direct on the Mercedes C, E and G KLASS models from 1996 to 1999 year for all key positions/number from 1 to 8. This transponder is for the models that use the metal or remote flip key with transponder inside. It is not working on models with electronic plastic key. The only thing you have to do is to insert the key into the ignition and turn it on then the transponder will program itself direct and you can start the car.
Tech 2 - Original diagnostic tester for GM cars |
 |
TECH 2 is the Original Diagnostic Equipment used by authorised OPEL, SAAB, SUZUKI, Vauxhall and GM Cars dealers worldwide, which means that it offers the most comprehensive diagnostic software available by us for OPEL/Vauxhall, SAAB and GM Cars vehicles. TECH 2 has the ability to diagnose the complete range of electronic systems for engine, transmission, body and chassis. The unit is a powerful, ergonomically designed handheld device that has a large LCD screen with an easy user software interface. A removable Vehicle Communications Interface (VCI) allows any hardware updates to be easily accommodated, protecting your investment. Its diagnostic capability includes fault code retrieval/clearing, live data display, actuator simulation/operation and the ability to record data whilst the vehicle is being driven. TECH 2 is a competitively priced portable solution offering independent garages the ability to diagnose OPEL, SAAB, SUZUKI, Vauxhall and GM vehicles as diagnosed by authorised dealers.
Features:
- OPEL/Vauxhall dealer software.
- Tests OPEL/Vauxhall system 92.
- Tests multi vehicle systems.
- Live data display.
- Flight recorder.
- Data capture and storage.
- Fault code reading / clearing.
- Actuator / sensor simulation.
- Key programming.
- Vehicle ECU initialisation / learn.
- Graphical function.
- Upgradeable hardware module.
- RS232 and RS485 PC interface.
- Self test functions.
|
|
This is original keyboard for Tech 2 tester and can be ordered as a spare part from us - 370 EURO. |
| TECH 2 TIS Approval Software Dongle |
|
|
| Programmers |
|
 |
Programmer
for TEXAS Instruments processors TMS 370 C 702 which
are built in VW and OPEL Immobilizer boxes. For VW,
Seat immobilizer boxes - 1998-2000. For OPEL immobilizer
ECU - all ASTRA G models and from 1999 to 2004 for
all other models. The programmer is equiped with LCD
display wich will show you the PIN code and automatically
recognize if it is VW, Seat or OPEL immobilizer. On
request software for reading PIN Codes via OBD II - 100 EURO.
Buy now 100 EUR
|
 |
 |
VW immobilizer |
Opel immobilizer |
|
|
| Transponder Remote Keys and Transponders |
 |
Transponder
keys – original keys and aftermarket keys |
|
|
 PCF 7935 Transponder BMW- 8 EUR (minimum order 20 pcs)
PCF7936 (Hi Tag 2) Transponder - 10 EUR (min order 20 pcs)
T5(TP05) - 5 EUR (minimum order 20 pcs)
.jpg) ID40 (T9, TP09) OPEL- 6 EUR (minimum order 20 pcs)
.jpg) ID48 (T6, TP08) VAG Group- 6 EUR (minimum order 20 pcs)
.jpg) ID4C (T3, TP02) FORD- 5 EUR (minimum order 20 pcs)
.jpg) ID4D (T7, TP06) FORD- 6 EUR (minimum order 20 pcs)
TP22 SEAT CAN 2005+ - 30 EUR (minimum order 5 pcs)
TP23 VW CAN 2005+ - 20 EUR (minimum order 5 pcs)
TP24 SKODA CAN 2005+ - 30 EUR (minimum order 5 pcs)
TP25 AUDI CAN - 30 EUR (minimum oder 5pcs)
|
Locksmiths
tools
|
|
Automotive Manipulation Key machines Pulling, Drilling and Milling
|
| New High Security Auto Pack |
|
VW, Audi, BMW and OPEL opening Kit - 720 EUR
Buy now 720 EUR
more info>>>
|
 |
Decoder for BMW two track (internal canal) - 750 EUR
| |
.jpg)
.jpg)
.jpg)
