|
!!! NEW NEW NEW NEW NEW !!!
BMW key/transponder programming device via OBD II - 2004 - 2009
E60/ E61 /E63 /E64/ E65/ E70/ E71/ E87/ E90/ E91/ E92/ E93
|
More info>>>
This new special device for BMW key and transponder programming for CAS module was developed to work via OBD II and also you can preprogram on site keys or transponders with the device as the device consists of a key programmer and Hi Tag programmer. With this new Device when you program the keys via OBD II, the existing/old keys will not be erased and you will be able to use them again. The Device is powered up from the OBD II connector of the car or you can use an external 12 Volts power supply. The Device is very usefull for Auto Locksmiths, auto engineers and special police agencies!!! |
Click here to see a demonstration movie of the BMW Key programming device on a 2008-09 BMW X5(E70) model! |
Price: 9000 EUR
  Buy now 9000 EUR
!!! NEW NEW NEW NEW NEW !!!
BMW key device
E60/ E61/ E63 /E64/ E70/ E71/ E87/ E90/ E91/ E92/ E93
key matching/reset odometer device
via CAS Connector |
More info>>>
BMW CAS KEY DEVICE is made for locksmith workshops, auto services and auto houses in order to be able to program blank transponder to BMW vehicles equipped with CAS2 or CAS3 module. This Device cannot program original keys but only transponders!!!
• You can choose which key number to be programmed from 0 to 3.
• Key pogramming takes about 10 seconds.
• PC Software for managing of stored keys inside device.
• Device can hold key data up to 8 different transponders.
• Device can reset odometer in CAS module to 0 km. |
Price: 2998 EUR
Buy now 2998 EUR
BMW Commander 5.2
Diagnostic tool for BMW (E3x, E46, E53, E6x, E70, E8x, E9x)
Now covering models from1996 till 2008 year(including) with K-line/CAN BUS/ KWP2000/DS2 communication protocol
 |
Features:
ABRITES Commander for BMW is a PC - Windows based diagnostic software for BMW vehicles E38 E39 E46 E53 E83 E85, E6x, E70, E8x, E9x. With help of your tool you can perform unusual for remaining diagnostic tools operations with the electronic modules inside of the vehicle.
-
Standard diagnostic functions:
- Connect via CAN bus 100 – Directly connection to CAS2 or CAS3 via CAS connector
- Connect with New Body BMW vehicles - E6X, E7X, E9x via OBDII
- Connect with Old Body BMW vehicles - E3x, E5x, E8x, R4x, R5x, L3x via OBDII or Circle connector
- Reading of DTCs (standard, history and shadow error memory of the modules)
- Clearing of DTCs (standard, history and shadow error memory of the modules)
- Entering in logistic mode of the modules in the vehicle
- Leaving from logistic mode
- Synchronization of the engine control module and car access system module
- Synchronization DME/DDE and EWS3/EWS4
- Enabling / Disabling of a key
- ENABLE/DISABLE of TV function for E38 E39 E46 E53 E83 E85
- Read and change KM inside EGS - Electronic Gear System
- Read and change KM inside EGS - Electronic Gear System
- Read and change KM inside VTG - Transfer Box
- Read and change KM inside ABS - Antilock Braking System
- Read KM from IKE, LCM, EWS, ECU
- Resetting service intervals
2. Special functions:
- Programming identification of the modules in the vehicle *
- Programming User Information Fields in the electronic modules *
- Read / Write of memory of the electronic control modules *
- READ/WRITE eeprom from CAS1 (E65) via OBDII
- READ/WRITE eeprom from CAS2 and CAS3 via dash connector or CAS connector, read/write km
- Programming odometer value in the CAS module (Information about enabled/disabled keys. Key cutting code)
- Programming key and remote control data in the CAS
- Direct programming key/transponder with the help of a programmer associated with software
* Not granted for all type of control modules.
- Read / Program VEHICLE ORDER DATA by OBDII. You can easily add new modules to the vehicle (like xenon lights and etc.). You can easily remove units from the vehicle so will be easy later to reprogram the FLASH memory of the elctronic control units independently and the existing vihicle configuration will not meet requirements for the SSS/Progman programming.
- Program keys by OBDII - CAS2 systems (free update for BN003)
- Program milleage by OBDII - CAS2 systems (free update for BN003)
- Reading flash memory from engine control units by OBDII (BOSCH EDC16x, BOSCH DDE4, BOSCH BMS46, SIEMENS MS41 /MS42 /MS43/ MS50/MS52/MS54, BOSCH ME7)
- New user interface for programming of keys CAS1/CAS2/CAS3
- Reading/writing CAS3 by OBDII. Programming keys and Remote control by OBDII for BMW vehicles equipped with CAS3 module with the help of the Hi Tag 2 programmer, connected together with the BMW Commander to the Laptop!
|
More info>>>
  (incl. VAT)
Abrites Vehicle Diangostic Interface(AVDI) - BN001 - 720 EUR Buy now 720 EUR
AVDI includes diagnostic functionalities for VAG, BMW, Toyota, OPEL,...
* - in next versions will be added also Renault, Fiat, Nissan, Mitsubishi, Honda, Ford....
Special functions for BMW Commande
BN002 - Memory menager - 300 EUR Buy now 300 EUR
BN003 - CAS1 and CAS2 modules - 246 EUR Buy now 246 EUR
- odometer correction, eeprom R/W, key coding
BN004 - CAS3 module - 246 EUR Buy now 246 EUR
- odometer correction, eeprom R/W, key coding with special cable
BN005 - Advanced coding functions - 246 EUR Buy now 246 EUR
- Read and program vehicle order data
BN006 - Read/write CAS 3 module via OBD II - 600 EUR Buy now 600 EUR
- odometer correction, eeprom R/W, key coding via OBD II
BMW Commander Full package - 2358 EUR Buy now 2358 EUR
- The Full package include AVDI hardware
NOTE: The Special cable is not included in the Full package price!
BMW Commander special cable for CAS 3 - 200 EUR |
BMW key programming device for EWS 2, 3 and 3+
 BMW key programming device for vehicles equiped with EWS 2 module with processor masks 2D47J and EWS 3/3+ module with processor masks OD46J, coverage E46, E38, E39, E53(X5), X3(early models), Z3, Range Rover 2002+, MINI COOPER till 2006. The device does not work on EWS 3 module with processor mask 2D47J, due to security reasons . With this device you can program 8 keys in the EWS 2 and 3/3+ module. Another feature of the device is to erase the old and lost keys, add new keys on whatever position you want from 0 to 7 as you leave the existing keys working. You can program new keys when all keys are lost or stolen. The old keys will still work and you can order another key from the dealer beside the number of the new already programmed keys. To be able to program/add new key, you must use our special transponder made for the key programming or the original BMW keys made ready for programming with the Device. The Device comes with 5 transponders for EWS 3/3+. With this device there is no need of a PC or power supply. All the power you need is the 9 Volts battery that you must put inside the device. There is no need of desoldering the processor, all you have to do is to clip the device onto the processor and press the little black button and the key/transponder will be programmed for 5 seconds. With this device you can reset the odometer inside the EWS molule and the transponder key!
!!! NEW !!! NEW !!! NEW !!! NEW !!! NEW !!!
For all customer who want to buy and already bought The EWS 2, 3 and 3+ device, we arrange one day course at the price of 1500 EUR where you will learn all about BMW EWS Imobilizer system, how to program new keys without disoldering the processor for 5 seconds, how to define all 10 keys in the EWS module, how to release and ban keys in the EWS module, how to change the mileages/km and ID number and how to make an adaptation to the DME/DDE even if you have a second hand EWS module from the scrap yard.
The price of the course includes the device price!
For all customers who have bought the BMW Device, now they can order original BMW Remote (Diamond Shape) keys with 2 track and 4 track canals and BMW nonremote keys with lamp 4 tracks like HU58BSP, ready to program them with BMW Key Device. Also available BMW Remote(Diamond shape) key casings, 2 track and 4 track .
The eight DIP swithches are used for programming keys on the different positions from 0 to 7
|
