|
Leader of the Electronic department of the
EUROPEAN LOCKMASTER GROUP
| TANGO programmer V1.77 - new generation of transponder programmer |
Tango programmer is a new generation of transponder programmer which is developed to cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies.
New function for reading the Kilometers, VIN and transponder type for all BMW keys was added to the BMW software module! Immo pin code is also displayede for some car models. With this programmer you can generate images for many different original transponders like Philips ID33, Philips Crypto for different ID's and Texas crypto! |
!!!!!! VERY IMPORTANT !!!!!!
After generating a new transponder with TANGO Programmer, you will not need any additional diagnostic equipment to program the generated transponder to the car! It will start the car directly, even on new FIAT CODE 2 system, also used in PSA Group vehicles! Only you have to write the new file back into the immobilizer system!
!!!!!! VERY IMPORTANT !!!!!!
For all owners of our original/genuine TANGO Programmer, you must update your unit eevry time a new update is released by us because if you do not update your TANGO Programmer for more than 3 months then it will lock and you would have to send it back to us for unlocking!
!!!!!! VERY IMPORTANT !!!!!!
|
NEW!!!!! * Free single TP22, TP23, TP24, TP25 transponder production everyday !!!!!NEW
* Free write Component Security 7 bytes Tool (Megamos ID48)
* 862 Key Makers, 580 included with basic software
* Searching of the 7th byte by existing car's key(Megamos48)
* Megamos8E Eeprom Access, Searching 7th Byte via existing key (VAG), Unlock Kia HITAG 2008-, Unlock Hyundai HITAG 2008-
* Read/Write transponder TPX2
* Image generator for ML transponder
NEW!!!!! * Image generator for 4D - ID67, 68 and 70 *NEW!!!!!
(only if you bought Toyota Key Maker)
NEW!!!!! *
|
|
| |
*630 Key Makers are included in the Basic software |
List of supported transponders:
Philips transponders:
PCF7930-31 writing, reading
PCF7935 writing, reading, shadow memory, crypto calculator
PCF7936 writing, reading, modes password, crypto, Manchester & Biphase encodings
PCF7941 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7942 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7943 transponder, remote, Manchester & Biphase encodings
PCF7944 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7945 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7946 transponder, remote, Manchester & Biphase encodings
PCF7947 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7952 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7961 transponder, remote, Manchester & Biphase encodings
*Auto switching between PCF7936 … PCF7961 windows if invalid type detected.
*Autodetect manchester / biphase
Temic transponders:
Temic 11 reading , writing to T5
Temic 12 reading , writing to T5
Megamos transponders:
Megamos (13) reading , writing to T5 , emulating on PCF7930-35
Megamos (48) reading, writing, PIN, unlock by PIN,
full range of memory contents, crypto calculation
Megamos CRYPTO-2 (8E) read ID, read/write EEPROM, write Cryptokey
Texas transponders:
Tiris (4C) reading
Tiris (4D) DST crypto reading, writing, crypto calculator
Tiris (4E) DST crypto reading, writing, crypto calculator
Tiris (8C) reading
Atmel:
TK5551M (T5 replacement)
SAAB reading , writing to T5
The product is in working out stages, therefore the list of the supported transponders will be developed later.
|
| Basic package price: 1200 EUR |
  Buy now 1200 EUR
| Payable Key makers for TANGO Programmer |
*NOTE: Always when you buy a key maker module write down your TANGO serial number!
!!! SPECIAL OFFER !!! from EDILOCK LTD only for 1750 EUR
Special deal on TANGO + OMEGA-ORANGE Programmer just for 1750 EUR. Normal price is 1950 EUR and you save 200 EUR with our special offer!
Buy now 1750 EUR |
Key Info Reader
specially developed to read the service and security information from the key/card memory
More info>>>
This Device and programmer is specially developed buy our company to read/write all data from the car key/card memory like VIN number, key ID number, colour of the car, UPH colour code, first registration of the car, last time you have drive the car and the the last mileages/km written on the dashboard! This Device is very usefull for Customs, Border Police, Local Police Departments, Insuarance companies and other Government Institutions. The Device now supports of transponder in the key like BMW(F and E series), MERCEDES BENZ, TOYOTA, VOLVO, OPEL, RENAULT, KIA, HYUNDAI, SAAB, SUZUKI, PEUGEOT, CITROEN, HONDA, AUDI A8, VW TOUAREG, VW PHAETON, PORSCHE CAYENNE and many other car models using different type of transponder.
Special functions - resetting the mileages/km and read/write the internall eeprom area of the BMW keys. Using the device as a Hi Tag 2 programmer. |
OMEGA - ORANGE Programmer
This is the original OMEGA-ORANGE Programmer produced in Bulgaria which is specially developed for work with vehicle Immobilizers. With OMEGA Programmer you can also read most types of microprocessors, eeprom and flash memories which are used on all immobilizers in the different vehicles and motorbykes.
Additional adapters for OMEGA-ORANGE Programmer >>>
Prices:
Immobilizer package - 750 EUR Buy now 750 EUR
!!!New New New New New New!!!
ORANGE 5 - New generation USB Programmer
Orange5 is a professional programming device for serial memories and microcontrollers.
Unique feature of the current serial programmer is built-in macrolanguage for writing down protocols, which gives fast and easy capability to add new types of microschemes, precisely meeting manufacturers' requirements to read/write algorithms. |
Additional adapters for ORANGE 5 Programmer >>>
Technical Info:
- USB power supply (USB2.0/3.0).
- Universal easy to plug panel ZIF16 for EEPROM
- Control of contacts in the sockets
- Two expansions compatible with Orange4 and Omega MTRK
- Protection against overcurrent
- Overload voltage protection
- Two types of power supply: Standart (USB) and enhanced (USB + external power supply)
- Three 3 adjustable voltage and current control: Voltage of power supply ( 2.0...5.0V ), programming voltage (2.0...21.0V),
additional static 10V for microcontrollers.
- High-speed bidirectional pin drivers with adjustable voltage (2.0...5.0V)
- Wave cycle generator with frequency ( up to 24 Mhz) and out voltage(2.0...5.0V) adjustment.
- Capability of functional emulation of class CDC USB devices.
- Built-in 32-bit virtual machine
- Supported interface: I2С, SPI, MicroWire, JTAG, UART, BDM, ISO7816, K-LINE (via adapter), CAN (via adapter).
- Programmer is encolsed in a functional box.
Supported working under Windows XP/7.
|
 
Price for ORANGE 5 Basic Kit - 350 EUR Buy now 350 EUR
Price for ORANGE 5 Immo package - 700 EUR Buy now 700 EUR
Price for ORANGE 5 Immo package with full adaptors- 950 EUR
Buy now 950 EUR
NOTE: Basic Kit includes 05BP2 & HC11A/Exx; TMS and K/CAN adapters.
Immo package includes Basic Kit and Immo HPX 1VO software.
|
Additional softwares for ORANGE 5 Programmer:
|
TAG KEY TOOL 5.0 - software and hardware
Models covered>>>
With this software and hardware you can program keys/transponders for defferent vehicle models that are using Megamos 48 (Megacrypt I), Megamos 8E (Megacrypt II), Texas 4C, TEMIC, T5, Philips PIT - 7930/7931/7935 (PIT), Philips HITAG2 – 7936, 7941, 7942, 7943, 7944, 7945, 7946, 7947, 7952, 7953, 7961.
This software is compatiable with AN020 and ZN001 transponder programmers . Just need dump from your immobilizer, put your NEW KEY (or transponder) on programmer and generate working key! You can also produce transponders for different vehicles.
* Now supported TEXAS CRYPTO transponers 4D, 4E
* Access to the internal EEPROM of the key - NISSAN key-cards
* Access to the internal EEPROM of the key - BMW F-series - newest BMW 5,7,6,X1,X3
* Access to the internal EEPROM of the key - RENAULT remote keys and key-cards
* Access to the internal EEPROM of the key - VOLVO key-cards
* Access to the internal EEPROM of the key - INFINITY key-cards
* Access to the internal EEPROM of the key - AUDI A6,Q7
* Transponder production for ID67, ID68, ID70 from Texas Tiris 4D
* Introduced HITAG-Pro transponders ( PCF7939, PCF7937, PCF7938, PCF7952 )
* Used in the latest BMW Fxx series, Porsche, VW, Audi, Bentley
*Key preparation by dump of CAS4 - newest BMW 1,5,6,7,X3 (body Fxx)
* Cloning Toyota/Lexus/Scion keys (ID67,ID68,ID70) on TPX2 - FREE
* Introduced TPX2 transponder - FREE
* Added more than 50 FREE utilities for programming of key by dump of immobilizer
* Introduced Hitag-2 biphase mode - FREE
* Programming internal eeprom of the keys/cards from Infinity, Nissan, Renault, Volvo - FREE
Price:
ZN001 - TAG programmer - 600 EUR Buy now 600 EUR
KT001 - Tag Key Tool software - 600 EUR Buy now 600 EUR
KT005 - TAG Key Tool - 600 EUR Buy now 600 EUR
- Utility for programming of TP22, TP23, TP24, TP25 from any Megamos 48
KT006 - TAG Key Tool - 198 EUR Buy now 198 EUR
- Key Maker for Passat B6/CC Keyless
KT007 - TAG Key Tool - 4800 EUR Buy now 4800 EUR
- Key programming by dump of CAS4 for BMW FXX series
TAG KEY TOOL - Full package - 6795 EUR Buy now 6795 EUR
- Full package includes teh TAG Programmer
|
Motorola/Freescale MC912-9S12-9S12(Xgate) in-circuit Programmer
| As you all new the comapany ROSFAR Technology is now closed forever! Just to let you know that the products R260, R250 and R200 are still in production and can be supplied by our company as we bought the full and exclusive rights to produce and sell them! |
List of all car models covered for in-circuit programming by the programmer
• BMW 1,3,5,6 Series CAS2 White (9S12)
• BMW 1,3,5,6,X5 Series CAS3 Black (9S12)
• BMW 1,3,5,6,X5 Series CAS3 Black ( 9S12X )
• BMW 7 Series CAS 2002 (HC12)
• BMW 7 Series CAS 2005 facelift (9S12)
• BMW X3/X5 EWS4 (9S12) incl. 2007 version !!!New!!! (editing of EWS4's 9S12D64 now works)
• Ford Mustang 2007 (9S12) !!!New!!!
• Landrover Freelander 2002 (HC12)
• Landrover Freelander 2004 (HC12)
• Mercedes A-Class 2004 Key Module (9S12)
• Mercedes C/CLK C209 ZGW (9S12) **
• Mercedes E/C W211 Key Module (HC12) **
• Mercedes E/C/CLK/SLK W211 Key Module (9S12) **
• Mercedes ML/R W164 Key Module (9S12) **
• Mercedes S/SL EZS R230 (9S12) **
• Mercedes Sprinter 2007 EZS (9S12) !!!New!!!
• Mini One/Cooper Dashboard (HC12)
• Mini One/Cooper Dashboard NAVI (HC12)
• Mini One/Cooper EWS4 (9S12)
• Mini One/Cooper CAS3 Black ( 9S12X )
• Volkswagen Crafter 2007 EZS (9S12) !!!New!!!
** - NOT for new NEC based modules (Amazonas, Havanna, Palermo, Spanien).
|
R260S Programmer can program the Motorola/Freescale 68HC912/MC912/MC9S12
microcontroller families, including the latest MC9S12X XGATE-based processor family. The
system works as a in-circuit programmer, no needs to remove the chip from the target board nor
lifting any pin. It connects to the board via serial connection by using only few wires and it works
with secured chips, too. No matter if it is secured or not! |
IMPORTANT!!! This interface can program any board that uses a HC12 , 9S12 or 9S12X series Motorola/Freescale secured and nonsecured microcontroller |
!!!!!!! THIS IS THE ORIGINAL and MOST RELIABLE ONE !!!!!!!!
Be aware that some competitors are providing copies of this tool without the automatic learning algorithm making them really unsafe. Use them at your own risk!
Price – 1500 EUR
Buy now 1500 EUR
|
