Edilock Ltd company specialize in developing of car diagnostics software, key programming and immobiliser pin code reading devices, odometer correction software and devices for bypassing the immobilizer of petrol and diesel cars from VAG Group and in production of Locksmith tools for car opening, destructive and none destructive lock opening and decoding of all kind of locks. All our products are genuine and we do not sell chinese copies. Most popular products are BMW Key Programming Device for CAS 3 module via OBD II for all E - series 2004 - 2013, AVDI hardware and special software functions , Toyota Key programming via OBD II, TANGO Programmer, OMEGA - ORANGE Programmer, TAG Key Tool, BMW EWS 3 Key programming Device, VAG Pin Code Reading, DASHCODER - Odometer programming tool and more...
All devices are sold for official use only!!! If you use them for any illegal purposes, this is your own responsibility !!!

BMW and Mini Cooper key/transponder programming device via OBD II - 2004 - 2013 V15.8 - B1
for
E60/ E61 /E63 /E64/ E65/ E70/ E71/ E84/ E87/ E90/ E91/ E92/ E93

Click here to see  how to program BMW X5 (E70)>>>

This new special device for BMW and Mini Cooper key and transponder programming for CAS module was developed to work via OBD II and also you can prepare on site keys or transponders with the device for programming to the car as the device consists of a car programmer and Hi Tag II key programmer. With this new Device when you program the keys via OBD II, the existing/old keys will not be erased and you will be able to use them again. The Device will program the remote control automatically at all available frequencies for Europe, North/South America, Africa and ASIA. The Device is powered up from the OBD II connector of the car. The Device is very useful for Auto Locksmiths, Auto engineers and Special Police Agencies!!

The device works with the latest BMW software ISTA V45/46/47/48/49/50/51/52/53/54/55/56/57 and up till the latest one for CAS 3/3+
 
 
For using this part of the site you must agree with new GDPR terms. Click here for more information.
Special offers:
Price is without VAT/Tax
BMW Key Programming Device + HU92 Turbo Decoder for BMW, MINI, ROVER and SCANIA
For using this part of the site you must agree with new GDPR terms. Click here for more information.

Special offer on BMW Key Programming Device + HU92 Turbo Decoder for BMW, MINI, ROVER and SCANIA just for 3500 EUR. Normal price is 3550 EUR and you save 50 EUR with our special offer!





   EDILOCK BMW F and G Series 2010 - 2020 alarm and central locking opening device - BOD1

  EDILOCK BMW F and G Series 2010 - 2020 alarm and central locking opening device is specially developed to help the auto locksmiths when opening BMW F series models equipped with CAS4 and FEM/BDM Module Immobilizer to be able to disarm the alarm and open the central locking of the car especially when the owner of the car locks his keys in the boot where you will need in most cases a second key in order to open the boot. but with the help of our special tool you can give ignition ON and stop the alarm and open the central locking. For UK specification cars there is a different coding than the EU and USA specification BMW vehicles so the device works on some some software versions on vehicles with CAS4 in UK only. Rest of the world the device works on CAS4 and FEM/BDM modules.

 

 

 


Click here to see how the device works on BMW F15 - X5 series 2018 with FEM/BDM

 


Click here to see how the device works on BMW F80 - M3 series 2018 with FEM/BDM

 



Click here to see how the device works on BMW F11 - 5 series Estate 2014 with CAS4

 

Click here to see how the device works on BMW F10 - 5 series Saloon 2012 with CAS4

For using this part of the site you must agree with new GDPR terms. Click here for more information.
Special offers:
Price is without VAT/Tax
EDILOCK BMW F and G Series2010 - 2021 alarm and central locking opening device + Turbo Decoder for BMW F Series with HU100R key profile
For using this part of the site you must agree with new GDPR terms. Click here for more information.

Special offer on EDILOCK BMW F Series alarm and central locking opening device + Turbo Decoder for BMW F Series with HU100R key profile just for 1200 EUR. Normal price is 1250 EUR and you save 50 EUR with our special offer!





Turbo Decoder for BMW, MINI, ROVER and SCANIA with HU92 key profile 



 

This tool is specialy designed to open the door locks and ignition lock of different vehicles in non destructive way. After you decode and open the lock then you can read the key combination from the tool and cut a key that will open and close the locks and will turn the ignition.

Warranty only after personal training from an authorized dealer or manufacturer.


Turbodecoder hu92 supports all E series till 2013  E60/ E61 /E 63 /E64/ E65/ E70/ E71/ E87/ E90/ E91/ E92/ E93.

It also works with HU83 locks for SOME models of Citroen, Lancia, Peugeot (door locks only).

For using this part of the site you must agree with new GDPR terms. Click here for more information.




Turbo Decoder for BMW F Series with HU100R key profile 


 

This tool is specialy designed to open the door locks of all BMW F Series vehicles in non destructive way. After you decode and open the lock then you can read the key combination from the tool and cut a key that will open and close the door lock.

 

Warranty only after personal training from an authorized dealer or manufacturer.


Turbodecoder HU100R supports all F series.

For using this part of the site you must agree with new GDPR terms. Click here for more information.




BMW Commander 30.8

Diagnostic tool for BMW (E3x, E46, E53, E6x, E70, E8x, E9x and Fxx)
Now covering models from 1996 till 2016 year (including) with K-line/CAN BUS/ KWP2000/DS2 communication protocol

 

      ABRITES Diagnostics for BMW, MINI is a PC - Windows based diagnostic software for dealer level access to the vehicle (identification, trouble codes and s.o.), calibration, key programming, programming vehicle order. Tool can access CAS1, CAS2, CAS3 and CAS3+ by OBDII independend from the firmware of the CAS. Also you can perform unusual for for other diagnostic tools operations with the electronic modules inside of the vehicle like programming Vehicle Order and Coding of electronic control units. Access to the memory of the units in the vehicle. Covers vehicles BMW series starting from E36 up to latest models F series (F01,F10,F20,F25 and s.o.). 

       Functions included in the base package (AVDI interface):

  • Identification (VIN, mileage, production data)
  • Read and clear diagnostic trouble codes (current, history and shadow)
  • Added DTCs in 17 languages: English, German, French, Thai, Swedish, Italian, Spanish, Indonesian, Korean, Greek, Turkish, Chinese, Chinese traditional, Russian, Dutch, Portuguese, Japanese. DTC conditions information (Odometer value, Timestamp, full engine status report for EDC17)
  • Some DTCs (mostly those of the F series) are given detailed documentation of what caused the problem and how the problem should be handled
  • Measured values/live data
  • Entering and leaving from logistic mode of the modules in the vehicle
  • Synchronization DME/DDE and EWS/CAS, CAS and ELV
  • Enable / Disablie of the keys
  • Enable / Disablie of TV function for E3x,E46,E5x,E83,E85,E86 (for the next bodies available via unit coding)
  • Ability for diagnostic on internal CAN buses
  • Displaying KEY CUTTING code (mechanical code) stored in CAS modules
  • EBRIDGE/Passthru - Compatibility with BMW - E-Sys, DIS, INPA, EDIABAS, NCS Expert, NFS over K-line and CAN bus

       Special functions:

              * Car Access System Advanced Coding - Programming identification of the units, user information fields, read/write memory of the units 
Programming keys for vehicles equipped with CAS1/CAS2/CAS3/CAS3+ by OBDII or cas/dash plug. Programming mileage stored in CAS1/CAS2/CAS3/CAS3+ by OBDII. Read/update ConfData of CAS2/CAS3 by cas/dash plug

  • Programming identification of the modules in the vehicle *
  • Programming User Information Fields in the electronic modules * 
  • Read / Write of memory of the electronic control modules *
  • Program mileage stored in CAS1, CAS2 and CAS3 by OBDII
  • Program keys by OBDII - CAS1, CAS2 and CAS3 systems - support latest versions CAS3 updated in 2013 year
  • Key programming for CAS3+ with latest firmware version (ISTA-P 48)
  • Read / Update ConfData from CAS1 via OBDII
  • Read / Update ConfData from CAS2/CAS3 via dash connector or cas-connector
  • Read / Calibrate data stored in different electronic control units by OBDII like ECU, EGS, SGM, JBBF and many others
  • Extracting and programming syncrhonization code between ECU and CAS by OBDII
  • Ability to works together with transponder programmer 
    * Not granted for all type of control modules.

           * Electronic Gearbox System synchronization - Perform synchronization/recovery between CAS, EGS and ECU

           * Advanced Coding Functionality - Reading and programming vehicle order data, reprogramming flash memory of all electronic 
control units,E-series unit coding

  • Service intervals/CBS - ability for programming of service counters by OBDII
  • Programming flash memory of all elcronic control units by OBDII (can be used directly datbases released from BMW)
  • Read and Program Engine Control Unit flash memory for tunning purposes by OBDII
  • Programming Vehicle Order data (you can add new units to configuration of the vehicle) - E body
  • Coding (configuration) of each electronic control unit in the vehicle - E body
  • Read / Update mileage from the IKE, LCM, EWS, ECU, ABS, VTG, EGS (please refer covarage list)
  • Manager of service intervals, reset service reminders (CBS)

           * Key Preparation by dump of CAS4 - Preparing a keys by dump for BMW models with CAS4 - newest BMW 1, 3, 5 GT, 6, 7, X3 
series ( body Fxx)


 

More info>>>

 

Updated Special functions - prices

Price is without VAT/Tax
For using this part of the site you must agree with new GDPR terms. Click here for more information.

- The set consist of “AVDI diagnostic interface”, PC-Windows based software with general diagnostic functions such as displaying/clearing DTCs, measured values (live data) display, actuator tests and basic coding/configuration functions. Covered vehicle brands are Audi, Volkswagen, Seat, Skoda, Bentley, BMW, Mini, Porsche, Opel, Vauxhall, Toyota, Lexus, Scion, Mercedes, Smart, Maybach, Renault, Mitsubishi, Hyundai, Kia, Fiat, Alfa, Lancia, Peugeot, Citroen, Chrysler, Jeep, Dodge, Ford, Mazda, Volvo. PassThru (SAE J2534) compatible driver will allow usage of 3-rd party software provided by the vehicle manufacturers ( i.e .IDS - Land Rover /Jaguar, Techstream – Toyota /Lexus / Scion, GDS2 and Tech2Win – GM/OPEL, BMW, Mini, Volvo ….). Some special diagnostic functions are included in the package such as updating flashing counters in the ECUs EDC16 (VAG - AN008), TV on/off configuration (VAG – AN011), access/update to the flash memory of ECU (VAG EDC15/EDC16 – AN015) When buying the AVDI interface you will receive one year free updates of all applications from the basic diagnostic suite.

For using this part of the site you must agree with new GDPR terms. Click here for more information.

- 12 months access to the latest software releases and online services

Your initial purchase of AVDI interface includes one year software update of the basic diagnostic suite, tools and our online services. To keep up to date your software applications and maintain usage of our online services we recommend the Annual Maintenance Subscription. Annual Maintenance Subscription is a renewable one year subscription. Annual Maintenance Subscription does not provide any support coverage this is provided separately by the Support Plan.

Activate AMS is required to purchase additional special functions

For using this part of the site you must agree with new GDPR terms. Click here for more information.

- 12 months support by email (required after expiration of the first year support included in AVDI package).

Clear step by step articles of AVDI procedures from a user perspective. Support desk manned by top AVDI professionals and fully integrated with the development team.

Support Plan can only be used with activated Annual Maintenance Subscription (AMS)

Special functions
Price is without VAT/Tax
For using this part of the site you must agree with new GDPR terms. Click here for more information.

Programming identification of the units, user information fields, read/write memory of the units
Programming keys for vehicles equipped with CAS1/CAS2/CAS3/CAS3+ by OBDII or cas/dash plug. Programming mileage stored in CAS1/CAS2/CAS3/CAS3+ by OBDII. Read/update ConfData of CAS2/CAS3 by cas/dash plug

  • Programming identification of the modules in the vehicle *
  • Programming User Information Fields in the electronic modules *
  • Read / Write of memory of the electronic control modules *
  • Program mileage stored in CAS1, CAS2 and CAS3 by OBDII
  • Program keys by OBDII - CAS1, CAS2 and CAS3 systems - support latest versions CAS3 updated in 2013 year
  • Key programming for CAS3+ with latest firmware version (ISTA-P 48)
  • Read / Update ConfData from CAS1 via OBDII
  • Read / Update ConfData from CAS2/CAS3 via dash connector or cas-connector
  • Read / Calibrate data stored in different electronic control units by OBDII like ECU, EGS, SGM, JBBF and many others
  • Extracting and programming syncrhonization code between ECU and CAS by OBDII
  • Ability to works together with transponder programmer
    * Not granted for all type of control modules.

New AVDI Interface or activate AMS is required to purchase this special functions.

* In order to use this function you have to buy the TAG PROG - ZN001

For using this part of the site you must agree with new GDPR terms. Click here for more information.

Perform synchronization/recovery between CAS, EGS and ECU


New AVDI Interface or activate AMS is required to purchase this special functions.

For using this part of the site you must agree with new GDPR terms. Click here for more information.

Reading and programming vehicle order data, reprogramming flash memory of all electronic
control units,E-series unit coding

  •     Programming flash memory of all elcronic control units by OBDII (can be used directly datbases released from BMW)
  •     Read and Program Engine Control Unit flash memory for tunning purposes by OBDII
  •     Programming Vehicle Order data (you can add new units to configuration of the vehicle) - E body
  •     Coding (configuration) of each electronic control unit in the vehicle - E body
  •     Read / Update mileage from the IKE, LCM, EWS, ECU, ABS, VTG, EGS (please refer covarage list)
  •     Sensor calibrations
  •     Manager of service intervals, reset service reminders (CBS)
  •     FSC Code calculation for E and F-series

New AVDI Interface or activate AMS is required to purchase this special functions.

For using this part of the site you must agree with new GDPR terms. Click here for more information.

Preparing a keys by dump for BMW models with CAS4 - newest BMW 1, 3, 5 GT, 6, 7, X3 series ( body Fxx)


New AVDI Interface or activate AMS is required to purchase this special functions.

For using this part of the site you must agree with new GDPR terms. Click here for more information.

BMW  Light : BN010, BN011, BN012

New AVDI Interface or activate AMS is required to purchase this special functions.

For using this part of the site you must agree with new GDPR terms. Click here for more information.

BMW Full : BN010, BN011, BN012, BN013

New AVDI Interface or activate AMS is required to purchase this special functions.

For using this part of the site you must agree with new GDPR terms. Click here for more information.

Key programming for BMW bikes by diagnostic

Read/Update ConfData by diagnostic link for the following immobilizers:
- MAGNETI MARELLI IMM003
- MAGNETI MARELLI IMM006
Read/Update ConfData by diagnostic link for the following ECUs:
- EFI TECHNOLOGY ACII/AC2I/AC5I/AC8I/AC13I/AC21I/AC23I
- EFI TECHNOLOGY AC19I/AC20I/AC25I/AC27I/AC32I
- MAGNETI MARELLI ACI100/ACI50x/ACI60x
- MAGNETI MARELLI IAW 15
- MAGNETI MARELLI IAW 5AM
- PHILIPS DiTECH
- Key programming Aprilia, Gilera, Piaggio

  

  

- Key programming of BMW bikes

  

- Key programming of BMW motorbike models with EWS 4 Immo by dump - R1200GS (2013+), C600 Sport/C600 GT (2012+), K1300R (2010+), K1600GT/GTL ( 2011+), F800GT/GSA (2013+)

   

  

 

- Key programming for bikes with MAGNETI MARELLI MIU1/MIU2/MIU4

 

New AVDI Interface or activate AMS is required to purchase this special functions.





Total quantity:
Total quantity:
Serial key:
Attention! - Serial key is for cases when you have main product. If you haven't main product, buy it first.
Quantity to remove: