Edilock Ltd company specialize in developing of car diagnostics software, key programming and immobiliser pin code reading devices, odometer correction software and devices for bypassing the immobilizer of petrol and diesel cars from VAG Group and in production of Locksmith tools for car opening, destructive and none destructive lock opening and decoding of all kind of locks. All our products are genuine and we do not sell chinese copies. Most popular products are BMW Key Programming Device for CAS 3 module via OBD II for all E - series 2004 - 2013, AVDI hardware and special software functions , Toyota Key programming via OBD II, TANGO Programmer, OMEGA - ORANGE Programmer, TAG Key Tool, BMW EWS 3 Key programming Device, VAG Pin Code Reading, DASHCODER - Odometer programming tool and more...
All devices are sold for official use only!!! If you use them for any illegal purposes, this is your own responsibility !!!

OBD II Key programming device/Emergency start for Mercedes SPRINTER 906 vehicles 2008 - 2018 - MBS1

 

 

 Click here to see how to perform OBD II Emergency Start on a MB Sprinter 2015 year

 

 

Click here to see how to perform OBD II Emergency Start on a MB Sprinter 2012 year

 

 

 

      !!! NEW NEW NEW !!! First ever in the world EDILOCK Group Ltd. company is proud to announce its new OBD II key programming device for Mercedes SPRINTER 906 vehicles with FBS3 Immo system from 2008 to 2018 where with the help of our new device you can perform emergency start of Mercedes SPRINTER 906 vehicle while generating one of the keys from the car memory onto our special key emulator and this will allow you to start the vehicle as many times as you want without erasing any of the original keys from the memory of the car and like this you can bring the car to your garage and then produce one of the keys from the original EZS/EIS switch from the vehicle  Also, another important feature of the device is that you can stop the alarm after you connect the device to the CAN BUS wiring of the car. The device is tested on Mercedes Benz vehicles models from the list bellow all with FBS3 Immo system.
     The device will work on the above mentioned Mercedes BENZ vehicles even if they are produced for Europe, South America or North America, ASIA and Australia.

   Models covered:

  • SPRINTER 906 model  - 2008 - 2018 - all with FBS3 Immo system
For using this part of the site you must agree with new GDPR terms. Click here for more information.




OBD II Key programming device for Mercedes Benz vehicles 2009 - 2015 - MBV1

 

Click here to see live demonstration of the device on 2013 Mercedes ML/GL

      !!! NEW NEW NEW !!! First ever in the world EDILOCK Group Ltd. company is proud to announce its new OBD II key programming device for Mercedes Benz vehicles with FBS3 Immo system from 2009 to 2013 where with the help of our new device you can perform emergency start of Mercedes Benz vehicle while generating one of the keys from the car memory onto our special key emulator and this will allow you to start the vehicle as many times as you want without erasing any of the original keys from the memory of the car. Also, another important feature of the device is that you can stop the alarm after you connect the device to the CAN BUS wiring of the car. The device is tested on Mercedes Benz vehicles models from the list bellow all with FBS3 Immo system.
     The device will work on the above mentioned Mercedes BENZ vehicles even if they are produced for Europe, South America or North America, ASIA and Australia.

   Models covered:

  • C KLASS  - 2009 - 03.2014 - all with FBS3 Immo system
  • CLS KLASS  - 2009 - 03.2014 - all with FBS3 Immo system
  • E KLASS  -  2009 - 03.2014 - all with FBS3 Immo system
  • G KLASS  -  2009 - 06.2015 - all with FBS3 Immo system
  • GL KLASS  -  2009 - 03.2014 - all with FBS3 Immo system
  • GLK KLASS  -  2010 - 03.2014 - all with FBS3 Immo system
  • ML KLASS  -  2009 - 12.2013 - all with FBS3 Immo system
  • R KLASS  -  2009 - 12.2013 - all with FBS3 Immo system
For using this part of the site you must agree with new GDPR terms. Click here for more information.




Turbo Decoder ADVANCED for Mercedes with HU64 key profile

DODGE:
Sprinter 2007 to 2011

CHRYSLER:
Crossfire 2003 to 2008

VOLKSWAGEN:
Crafter 2006 onwards

MERCEDES:
CL 1995 To 1999
CLK, 2002 Onwards
C Class 1999 Onwards
E Class, 1997 Onwards
M Class
S Class 1995 Onwards
SL Class 1995 Onwards SLK 1997 Onwards
All Mercedes 2 Track Including Boots And Sunken Handles

For using this part of the site you must agree with new GDPR terms. Click here for more information.




!!! NEW NEW NEW !!!

SMART Vehicles Key Teach-In Device - 1998 - 2020, RENAULT Traffic III 2014-2019 and RENAULT Twingo III Key programming device - SMV2 

 

 

     The Key programming device supports all SMART vehicles from 1998 to 2020 year models like 450/451/452/454, RENAULT Traffic III 2014-2019 and the New Renault Twingo III/SMART 453. All you need is a original remote/transponder key for SMART vehicle and for some models you must use prepare transponder by EDILOCK Group Ltd. You can perform Key Synchronization over K-Line and CAN BUS after the device will creat automatically diagnostic session with the SAM unit and performs synchronization of all available keys over K-Line and CAN BUS. You can even start the car without a working transponder for models 451/454 and this mode is useful when you do not have a working transponder and you wish to move the car to your garage and make a new key for the customer. The car can only be started once when this mode is activated.

  For the New RENAULT Traffic III 2014 - 2019 and the TWINGO III you will need an original remote key or transponder and the device will precode it and then program to the car. The programming procedure will take from 30 seconds to 5 minutes.

 NOTE: The device will erase all existing keys in the vehicles and will reprogram all existing keys back to the vehicle and will add new keys as well and will no more permanently erase the old working keys. Customers with devices bought before 03.2021 which were never updated must send them back for update. 

For using this part of the site you must agree with new GDPR terms. Click here for more information.




SMART Vehicles 450/451/452/454 Key Teach-In Device - 1998 - 2013 - SMV1 

 

 

     The SMART key learning device supports all SMART vehicles from 1998 to 2013 year models like 450/451/452/454. All you need is a original remote/transponder key for SMART vehicle and for some models you must use prepared transponder by EDILOCK Group Ltd. You can perform Key Synchronization over K-Line and CAN BUS after the device will creat automatically diagnostic session with the SAM unit and performs synchronization of all available keys over K-Line and CAN BUS. You can even start the car without a working transponder and this mode is useful when you do not have a working transponder and you wish to move the car to your garage and make a new key for the customer. The car can only be started once when this mode is activated.

For using this part of the site you must agree with new GDPR terms. Click here for more information.




Mercedes BENZ transponders for ML W163 model - 1998 to 2005 year 

EDILOCK Group Ltd. company can generates for you transponder for programming to Mercedes Benz ML model W163 from 1998 to 2005

Packages
Price is without VAT/Tax
1 chip for ML
For using this part of the site you must agree with new GDPR terms. Click here for more information.
5 chips for ML
For using this part of the site you must agree with new GDPR terms. Click here for more information.
10 chips for ML
For using this part of the site you must agree with new GDPR terms. Click here for more information.




UNIVERSAL MERCEDES BENZ TRANSPONDER FOR KEY PROGRAMMING for E, C and G KLASS 



The transponder is ready to program direct on the Mercedes C, E and G KLASS models from 1995 to1997 year for all key positions/number from 1 to 8. This transponder is for the models that use the metal or remote flip key with transponder inside. It is not working on models with electronic plastic key. The only thing you have to do is to insert the key into the ignition and turn it on then the transponder will program itself direct and you can start the car.
For using this part of the site you must agree with new GDPR terms. Click here for more information.
Packages
Price is without VAT/Tax
5 chips for C, E and G KLASS
For using this part of the site you must agree with new GDPR terms. Click here for more information.
10 chips for C, E and G KLASS
For using this part of the site you must agree with new GDPR terms. Click here for more information.




MERCEDES Benz Commander Software 10.3 



Main page



Special functions



More info>>>

Mercedes Commander functions>>>

Mercedes Benz ECU's connection pinouts >>>

     ABRITES Diagnostics for Mercedes, Smart, Maybach is a professional software for diagnostic of Mercedes-Benz vehicles. It allows you to perform complete diagnostics of all 1995-present Mercedes-Benz models. It provides some unique functions, which are not supported by any other diagnostic tool. Diagnostics is performed via the OBD-II connector or via Mercedes-Benz proprietary 38-pin connector (only older cars, pre-2001), or via Mercedes-Benz proprietary 14-pin connector. Our PC USB diagnostic interface supports over 26 multiplexed K-Lines and Mercedes-Benz diagnostics CAN-BUS interface (also known as CAN-D).

    Standard diagnostic functions:

  • Read identification
  • Read extended identification
  • Read/Clear fault codes
  • Scanning for control units / Clearing fault codes in all control units
  • Display of Actual Values
  • Actuator Tests
  • Reset of control units
  • Control unit adaptations
  • Adjustment of injector injection quantities adaptation for Diesel Engines (CDI-4, CDI-5)

Special functions (to see what functions and which control units are suported when you have a certain special function, please check this PDF):

    * Instrument Cluster Data Manager - Updating data memory instrument clusters

 

  • By OBDII - Calibration for W221 and W216 vehicles. The mileage is changed in the following units: CGW, EZS, Instrument Cluster and all other units, which store the mileage (like Tire Pressure Monitor and Adaptive Brake, for example) , Read/Write service history records in ZGW of W221 S-Class and W216 CL, Read/Update ConfData and Flash of CGW (Central gateway) of W221 S-Class and W216 CL, Cluster Calibration for Vito, Viano, Sprinter after 2006 year E-Class W211, CLS W219, GL X164, ML W164, R-Class W251, CLK W209, C-Class W203 and G-Class W463, A-Class W169, B-Class W245
  • By OBDII - Calibration for W204/W212/X204/W197/W207 vehicles. The value is changed in the following units: ASSYST, ASSYST Plus, EZS, Instrument Cluster 
  • By OBDII - Read/Update ConfData of Dashboard control units, ESP, Sensotronic Brake Control (SBC) and many others... 
    Online manual for Sensotronic Brake Control Repair
  • By OBDII - Change ASSYST PLUS Service maintenance records
  • By OBDII - Change ASSYST Service maintenance records
  • By OBDII - Read/Update ConfData of Central Gateway (CGW) via OBDII. Works for the following vehicles : W211, W171, W219, W164, X164, W169, W245, W204, W212, X204, W218

     * TV, ECU, Airbag Manager - Reading and updating flash and configuration memory of ECUs: Siemens SID, EDC15, EDC16. 
Service list update. TV, AUX on/off configuration. Ability for managing stored crash data and 
configuration memory of electronic control unit

  • By OBDII - Airbag - Read/Update ConfData, Clear Crash Data, Erase Motohours
  • By OBDII - ECU - Read/Write Flash, Read/update ConfData of Engine Control Units
  • Dump Tool - calculate/reset calibration values, clear airbag crash data, make engine control virgin and so on
  • By OBDII - TV/AUX activation/deactivation
  • By OBDII - Seatbelt warning activation/deactivation
  • By OBDII - Reverse warning activation/deactivation
  • By OBDII - Activation/deactivation of Speed warning for Gulf States

    * Key Programming and EIS/ESL Data Manager - Generating of key dumps for vehicles with DAS-2, DAS-2A, DAS-2B, DAS-3.Smart key teach-in. Read partially data of the EIS. Read/update configuration data of the ESL

  • DAS-2 - Generation of key dumps for vehicles with DAS-2 Immobilizer system.
  • DAS-2a - Programming transponder keys for DAS 2a Immobilizer system (W168 A-Class).
  • By OBDII - DAS-2b - Key Learning for Mercedes W163; Read/Update ConfData of AAM/EAM control modules; Learn radio code of transmitter keys; Deactivate/Reactivate keys
  • Transponder generation
  • Electrical Steering Lock (ESL) - Read/Write/Unlock ESL for the following vehicles: W202, W208, W209, W210, W203, W211, W219 by direct connection to the ESL module. 
    Please, note that in order to erase or write the ConfData of this type of ESL you need to have the ESL database.
  • Electrical Ignition Switch (EIS, K-Line) - Read CinfData of EIS and ESL modules by diagnostic connection to the EIS module; Open/Close ESL
  • Electrical Steering Lock (ESL, CAN) - Disable/Enable keys; Write VIN of new units; Activate/Deactivate ESL; Activate/Deactivate EZS
  • Generation of Dumps for programming keys for cars, which use DAS-3 system. With the IR Key Manager special function you can generate keys for the following vehicles: W203, W208, W209, W210, W211, W215, W219, W220, W230, W639. The generated dumps should be programmed in the EZS, ESL and the key. For the key all NEC processors and the following Motorola processor is supported: MA 567 880 051, 654 367 2004 
    For all owners of MN022 license - If you have a Motorola key (it doesn't matter if it is working key or not, as long as it is from the same car) we can send you working key dumps without the need to dissassemble, desolder and read the EZS! Just read the EZS by diagnostics from the Special Function "EIS K-Line" and send the dump together with the dump from the Motorola key to support@abritus72.com . We will send you working key dumps FREE of charge within 1 working day. 
  • ZN002 - NEC programer - for NEC MCU's assembled in the IR-Keys
  • By OBDII - SMART key teach-in (K-Line and CAN)

* 7-gear ETC and ISM recalibration - Resetting ETC (722.9) and ISM by diagnostic to the factory state without losing of SCN coding

  • By OBDII - Renew of 7-Gear Electronic Transmission Control Unit (722.9) and ISM - Intelligent Selector Module

 

Updated Special functions - prices

AVDI
Price is without VAT/Tax
For using this part of the site you must agree with new GDPR terms. Click here for more information.

- The set consist of “AVDI diagnostic interface”, PC-Windows based software with general diagnostic functions such as displaying/clearing DTCs, measured values (live data) display, actuator tests and basic coding/configuration functions. Covered vehicle brands are Audi, Volkswagen, Seat, Skoda, Bentley, BMW, Mini, Porsche, Opel, Vauxhall, Toyota, Lexus, Scion, Mercedes, Smart, Maybach, Renault, Mitsubishi, Hyundai, Kia, Fiat, Alfa, Lancia, Peugeot, Citroen, Chrysler, Jeep, Dodge, Ford, Mazda, Volvo. PassThru (SAE J2534) compatible driver will allow usage of 3-rd party software provided by the vehicle manufacturers ( i.e .IDS - Land Rover /Jaguar, Techstream – Toyota /Lexus / Scion, GDS2 and Tech2Win – GM/OPEL, BMW, Mini, Volvo ….). Some special diagnostic functions are included in the package such as updating flashing counters in the ECUs EDC16 (VAG - AN008), TV on/off configuration (VAG – AN011), access/update to the flash memory of ECU (VAG EDC15/EDC16 – AN015) When buying the AVDI interface you will receive one year free updates of all applications from the basic diagnostic suite.

For using this part of the site you must agree with new GDPR terms. Click here for more information.

- 12 months access to the latest software releases and online services

Your initial purchase of AVDI interface includes one year software update of the basic diagnostic suite, tools and our online services. To keep up to date your software applications and maintain usage of our online services we recommend the Annual Maintenance Subscription. Annual Maintenance Subscription is a renewable one year subscription. Annual Maintenance Subscription does not provide any support coverage this is provided separately by the Support Plan.

Activate AMS is required to purchase additional special functions

For using this part of the site you must agree with new GDPR terms. Click here for more information.

- 12 months support by email (required after expiration of the first year support included in AVDI package).

Clear step by step articles of AVDI procedures from a user perspective. Support desk manned by top AVDI professionals and fully integrated with the development team.

Support Plan can only be used with activated Annual Maintenance Subscription (AMS)

Special functions
Price is without VAT/Tax
For using this part of the site you must agree with new GDPR terms. Click here for more information.

Mileage calibration in the instrument cluster for Mercedes-Benz vehicles with IC213 and IC222. Software synchronisation block between cluster and EZS for IC213. Retrofit of IC213 and IC222

For using this part of the site you must agree with new GDPR terms. Click here for more information.

Reading EZS password with/without working key. Key programming. Reset (virgin), activation and personalisation of EZS, ECU and TCU modules for all Mercedes-Benz trucks (MP4 platform) with infra-red key

ZN003, ZN075 and TA69 ARE REQUIRED when purchasing the special function.

For using this part of the site you must agree with new GDPR terms. Click here for more information.

ey programming and module exchange (using both new and second-hand modules) - renewal, personalisation and activation of Electronic Ignition Switch (EIS/EZS), Infra-Red Key, Transmission Control Unit (VGS-NAG2, VGS-NAG3, VGS2-NAG4, VGS-FCVT, VGS-FDCT), Intelligent Servo Module (ISM, DSM), Electronic Steering Lock (ESL/ELV all types!), ESM (for Mercedes-Benz W220) for FBS3 vehicles. Reset of FBS4 Engine control units to virgin state, read the personalization data from a FBS4 ECU and saving it to a file for future use, program personalization data from a previously saved file to a FBS4 ECU, FBS4 ECU Activation

ZN036 IS REQUIRED when purchasing the special function.

For using this part of the site you must agree with new GDPR terms. Click here for more information.

MN033 is dedicated to resolving a problem with the "ELV Component Fault" which is preventing the vehicle from being started and driven. This is a common fault in the Electronic Steering Lock (ESL/ELV) modules. The MN033 enables you to clear the critical error which blocks the vehicle's electronic steering lock.

For using this part of the site you must agree with new GDPR terms. Click here for more information.

Full set of special functions for Mercedes-Benz passenger vehicles. Additional hardware is required for key programming

For using this part of the site you must agree with new GDPR terms. Click here for more information.
DAS4/FBS4 Personalization Expert
Additional cables and programmers
Price is without VAT/Tax
MB 38 pin Round Cable
For using this part of the site you must agree with new GDPR terms. Click here for more information.
Cable for connecting AVDI and ESL(ELV)
For using this part of the site you must agree with new GDPR terms. Click here for more information.
Cable for connecting AVDI and dashboard W203, W209, W211, W219
For using this part of the site you must agree with new GDPR terms. Click here for more information.




Mercedes Benz Smart Key Programming Device Package - 1997 - 2013
   
(Sprinter/Vito vans can be programmed till 2018 year)

 

This special Mercedes Benz smart keys programming package is developed for programming, reprogramming and repairing of Electronic ignition key for Mercedes Benz vehicle models produced between the years 1998 - 2013 and Sprinter and Vito till 2016 year. In order to program or reprogram MB Electronic ignition key you have to reset an old key with the help of our programming package device or program a new blank key, you will have to take out the Electronic Ignition Switch(EIS) if it is not posible to read the eeprom dump via IR or OBD II and the Electronic steering lock(ESL) and then with the special software that comes with the package programmer you will be able to reset the EIS and the ESL and then reprogram them together. In order to read the eeprom dumps from the EIS, ESL and Engine ECU if it is not possible via OBD II then you will need the special programmers like ORANGE 5 programmer and the Motorola/Freescale MC912-9S12-9S12(Xgate) in-circuit Programmer.                  


                                                  !!! NO TOKENS NEEDED AFTER YOU BUY THE PROGRAMMING PACKAGE !!!


Now with our special programmer you can read the EIS and ESL modules via diagnostic connector for the models 202, 208 and 210!

You can also unlock the ESL (electronic steering lock) with our special software.

For customers who wants to visit our company and see how it works, we do a special course for the MB Smart Key Programmer! Send an e-mail for the course price!

For using this part of the site you must agree with new GDPR terms. Click here for more information.
Price is without VAT/Tax
Full package price of Mercedes key Prog Tool




EDILOCK EIS Extractor Tool

 

For using this part of the site you must agree with new GDPR terms. Click here for more information.




Total quantity:
Total quantity:
Serial key:
Attention! - Serial key is for cases when you have main product. If you haven't main product, buy it first.
Quantity to remove: