Edilock Ltd company specialize in developing of car diagnostics software, key programming and immobiliser pin code reading devices, odometer correction software and devices for bypassing the immobilizer of petrol and diesel cars from VAG Group and in production of Locksmith tools for car opening, destructive and none destructive lock opening and decoding of all kind of locks. All our products are genuine and we do not sell chinese copies. Most popular products are BMW Key Programming Device for CAS 3 module via OBD II for all E - series 2004 - 2013, AVDI hardware and special software functions , Toyota Key programming via OBD II, TANGO Programmer, OMEGA - ORANGE Programmer, TAG Key Tool, BMW EWS 3 Key programming Device, VAG Pin Code Reading, DASHCODER - Odometer programming tool and more...
All devices are sold for official use only!!! If you use them for any illegal purposes, this is your own responsibility !!!

!!! NEW !!! FIAT/LANCIA/ALFA ROMEO and IVECO Immo and Alarm bypass device - FLA1 

(4th generation device)

  

FIAT 500 2010 year Emergency start with EDILOCK Immo Bypass device via OBD II

FIAT Doblo 2014 Emergency start with EDILOCK Immo Bypass device via OBD II

Lancia Ypsilon 2016-2017 Emergency start with EDILOCK Immo Bypass device via OBD II


IVECO Van 2020 year model Emergency start with EDILOCK Immo Bypass device via OBD II

 

The two movies bellow are for customers who had the old device (2nd generation)

Click here to see Immo bypass and ECU reset on new Lancia Ypsilon 2014

Click here to see Immo bypass and ECU reset on new FIAT Punto 2014

 

    The Immo bypass tool is manufactured to work with Fiat/Lancia/Alfa Romeo and IVECO vehicles with Immo code system 2. The device can do automatically the following function:

    -    Identification of the control unit via OBD II.
    -    Stop the alarm of certain models FIAT/ALFA/LANCIA vehicles. 
    -    Emulation of the Immo system code in the ECU via OBD II without using the PC software.   

 

    All these functions will allow you to start the vehicle while the device is plugged into the OBD II connector of the car and drive it to your service where you can program new transponder key. When you remove the device from the OBD II connector the car will not start anymore until you plug in the device again into the OBD II connector while the ECU will stay in virgin mode and you will be able to adapt any BCM or Immo box with existing working key! The whole procedure is done for 3 - 10 seconds. New IVECO Van vehicle 2020 models takes up to 2 min to bypass the immobilizer function.

     The device works on the following vehicle modules bellow which can communicate !!! ONLY !!! under CAN BUS diagnostic protocol and the device IS NOT PROGRAMMING KEYS.

      Vehicle list for Immo Bypass function:   

FIAT 500 – 2007 - 2023 - all engine types 
FIAT 500L – 2007 - 2009 (1.2 and 1.4 petrol) and 2010 - 2023 - all engine types 
FIAT 500 ABARTH – 2008 - 2023 - all engine types 
FIAT Punto/Grande Punto/ABARTH Grande Punto – 2008 - 2023 - all engine types 
FIAT FIORINO – 2008 - 2023 - all engine types 
New FIAT DOBLO – 2012 - 2013 - all engine types 
FORD Ka – 2008 - ...+... - all engine types like the model from the picture
New Lancia Ypsilon – 2012 - 2023 - all engine types 
New FIAT Panda – 2012 - 2023 - all engine types 
FIAT Ducato, Peugeot Boxer and Citroen Jumper - 2010 - 2023 -
if equipped with DELPHI BCM module then all engine types or if not then only with Magneti Marelli ECU 8F2 and 8F3 for 2.8 L
IVECO - 2010 - 2023 - if equipped with DELPHI BCM module then all engine types 
Alfa Romeo MITO - 2008 - 2023 - all engine types 
Alfa Romeo GIULIETTA - 2010 - 2023 - all engine types 
etc ...

    NOTE: For some vehicle models from 2018 - 2021 with SGW(security gateway) which blocks the CAN BUS communication via OBD II to the BCM you will need to connect to the internal CAN BUS wiring of the car in order to perform Immo Bypass function or Alarm stop.

     Vehicle list to stop the alarm:

FIAT 500 – 2007 - 2023 - with DELPHI BCM all engine types
FIAT 500 ABARTH – 2008 - 2023 - with DELPHI BCM all engine types
FIAT Punto/Grande Punto/ABARTH Grande Punto – 2008 - 2023 -with DELPHI BCM  all engine types
FIAT FIORINO – 2008 - 2023 - with DELPHI BCM all engine types
New FIAT DOBLO – 2012 - 2023- with DELPHI BCM all engine types
FORD Ka – 2008 - 2023 - only the model equiped with FIAT DELPHI BCM
New Lancia Ypsilon – 2012 - 2023 - with DELPHI BCM all engine types
New FIAT Panda – 2012 - 2023 - with DELPHI BCM all engine
Alfa Romeo MITO - 2008 - 2023 - with DELPHI BCM all engine types

    NOTE: For some vehicle models from 2018 - 2023 with SGW(security gateway) which blocks the CAN BUS communication via OBD II to the BCM you will need to connect to the internal CAN BUS wiring of the car in order to perform Immo Bypass function or Alarm stop.

 

For using this part of the site you must agree with new GDPR terms. Click here for more information.
Special offers:
Price is without VAT/Tax
FIAT Immo Bypass Device FLA1 + SIP22 Turbo Decoder
For using this part of the site you must agree with new GDPR terms. Click here for more information.

Special offer on FIAT Immo Bypass Device + SIP22 Turbo Decoder just for 1200 EUR. Normal price is 1250 EUR and you save 50 EUR with our special offer!

FIAT Immo Bypass Device - FLA1 + SIP22 Turbo Decoder + Secret Gateway Cable - SGW1
For using this part of the site you must agree with new GDPR terms. Click here for more information.

Special offer on FIAT Immo Bypass Device + SIP22 Turbo Decoder + Secret Gateway cable SGW1 just for 1300 EUR. Normal price is 1350 EUR and you save 50 EUR with our special offer!






FCA Security Gateway bypass cable - SGW1

 

         FIAT, ALFA ROMEO and LANCIA Secret Gateway cable which is used to bypass the security access for diagnostic connection for some FCA vehicles from 2018 onwards and the cable has to be connected direct to the Security Gateway of the vehicle which is situated around the steering column and you have to disconnect the two connectors from the gateway and connect them to our cable an dthen use for disgnostic connection the OBD II connector of our cable.

For using this part of the site you must agree with new GDPR terms. Click here for more information.




 !!! NEW !!! FIAT/ALFA ROMEO Key Programming device - FLA2 

(only for Keyless Go keys for ALFA ROMEO Giulia, ALFA ROMEO Stevlio, FIAT 500X and JEEP RENEGADE)

  

FIAT 500X and JEEP Renegade 2017 year KeyLess Go key programming with EDILOCK FIAT Key Programmer

 

ALFA ROMEO GIULIA and STEVLIO KeyLess Go key programming with EDILOCK FIAT/ALFA Key programmer

 

 ALFA ROMEO GIULIA and STEVLIO 2017-2018 year KeyLess Go key programming with EDILOCK FIAT/ALFA Key programmer

 

 

 

     The device will program new blank key with Keyless Go/Proximity fuction to ALFA ROMEO GIULIA, ALFA ROMEO STEVLIO, FIAT 500X and JEEP RENEGADE for the moment. In the future we will add more models. All you need is our special device and one new blank key and in few seconds the key will be programmed. The whole procedure is done via OBD II and works also for model in 2018 year.

    NOTE: The device program !!! ONLY !!! Keyless Go keys for the models mentioned bellow and IT IS NOT DOING IMMO BYPASS.
 

         Models covered:

  •  ALFA ROMEO Giulia   2015 - 2018
  •  ALFA ROMEO Stevlio   2015 - 2018
  •  FIAT 500X   2014 - 2018
  •  JEEP RENEGADE   2014 - 2018
      
For using this part of the site you must agree with new GDPR terms. Click here for more information.
Special offers:
Price is without VAT/Tax
FIAT/ ALFA ROMEO Key Programmer + SIP22 Turbodecoder
For using this part of the site you must agree with new GDPR terms. Click here for more information.

FIAT/ALFA ROMEO Key Programmer + SIP22 Turbodecoder just for 2000 EUR. Normal price is 2050 EUR and you save 50 EUR.





Turbo Decoder for Fiat, Lancia, Citroen, Peugeot, Iveco, Ford Ka with SIP 22 key profile 


 

This tool is specialy designed to open the door locks and ignition lock of different vehicles in non destructive way. After you decode and open the lock then you can read the key combination from the tool and cut a key that will open and close the locks and will turn the ignition.

Warranty only after personal training from an authorized dealer or manufacturer.

ABARTH
500 - from 2008
Grande punto - from 2007  to 2010
Punto Evo - from 2010
 
ALFA ROMEO 
156 - from 2001  to 2003
156 Sport W. - from 2001  to 2007
166 - from 2004  to 2008
Giulietta - from 2010
Mito - from 2008
 
CITROEN
Jumper - from 2006
Nemo - from 2008
Relay - from 2006
 
FIAT
500 - from 2007
Bravo - from 2007
Doblo - from 2006
Fiorino - from 2007
Grande Punto - from 2005
Idea - from 2009
Panda - from 2002
Punto Evo - from 2009
Qubo - from 2008
 
FORD EU
KA - from 2009
 
IVECO
Eurocargo - from 2002 to 2007
Stralis - from 2002 to 2007
 
LANCIA
Delta - from 2008
Musa - from 2009
Ypsilon - from 2011
 
PEUGEOT
Bipper - from 2009
Boxer - from 2006
For using this part of the site you must agree with new GDPR terms. Click here for more information.




Commander Software for Fiat / Lancia / Alfa Romeo/ FCA  V7.4 




More info>>>

ABRITES Commander for Fiat/Lancia/Alfa is software designed for odometer correction of Fiat vehicles. In the next versions it will be developed as a diagnostic tool.

      Standard diagnostic functions: 

           In this version of the software have been added several units. You can connect with them to Read and Clear DTC's.

    

    Special functions:

  • Odometer correction via OBDII in instrument cluster of CAN based vehicles - Strada, Idea, Punto, Grande Punto 
    Panda, Palio, Linea, Ducato 2006+, Albea, Croma 2006+, Doblo, Lancia Musa 2006+, Bravo 2005+, 
    Maserati Quattro porte 2005, 2006
  • Key programing via OBDII - Alfa 147, Mito; Fiat 500, Bravo, Grande punto, Croma, Doblo, Ducato, Fiorino, Idea, Palio, Panda, Stilo; Lancia Thesis, Delta
  • Odometer correction - Fiat Fiorino
  • Mileage recalibration by OBDII - Fiat 500, Alfa 147, Alfa 159, Lancia Y, Alfa Mito, Ford Ka 
  • Read/Write eeprom memory, Odometer correction by OBDII of Engine Control Unit - EDC15C5(EURO2), EDC15C7(EURO3). This model ECU have the following vehicles:

    Alfa 145 - 1.9 JTD 
    Alfa 146 - 1.9 JTD 
    Alfa 147 - 1.9 JTD 16V ; 1.9 JTD 8V 
    Alfa 156 - 1.9 JTD ; 2.4 JTD 
    Alfa 166 - 2.4 JTD 
    Fiat Bravo - 1.9 JTD 
    Fiat Brava - 1.9 JTD 
    Fiat Doblo - 1.9 JTD 
    Fiat Ducato - 2.0 JTD ; 2.3 JTD ; 3.8 JTD 
    Fiat Marea - 1.9 JTD ; 2.4 JTD 
    Fiat Marengo - 1.9 JTD 
    Fiat Multipla - 1.9 JTD 
    Fiat Punto - 1.9 JTD 
    Fiat Palio - 1.9 JTD 
    Fiat Stilo - 1.9 JTD 
    Fiat Scudo - 2.0 JTD 
    Lancia K - 1.9 JTD 
    Lancia Lybra - 1.9 JTD ; 2.4 JTD 
    Lancia Thesis - 2.4 JTD 
    Lancia Z - 1.9 JTD
  • Dump tool - EDC16 Odometer correction 
  • Read/Write eeprom memory, Odometer correction, Make VIRGIN by OBDII of Engine Control Unit - Marelli Multijet MJD 6JF. This model ECU have the following vehicles: 

    Fiat new Panda - 1.3 IAW Multijet MJD 6JF 
    Fiat Idea - 1.3 IAW Multijet MJD 6JF 
    Fiat Doblo - 1.3 IAW Multijet MJD 6JF 
    Fiat Punto - 1.3 IAW Multijet MJD 6JF 
    Fiat Grande Punto - 1.3 IAW Multijet MJD 6JF 
    Fiat Cinquecento - 1.3 IAW Multijet MJD 6JF 
    Lancia Musa - 1.3 IAW Multijet MJD 6JF 
    Lancia Ypsilon - 1.3 IAW Multijet MJD 6JF 
  • Read/Write Eeprom memory, Make VIRGIN by OBDII of Engine Control Unit - Marelli IAW 4AF/4EF/59F/5AF/5AM/5NF 
  • Read/Write Flash memory by OBDII of Engine Control Unit - Marelli IAW 4AF/4EF/59F/5AF /6JF 
    MJD 6JF - IMMO OFF 

  • Change odometer of Engine Control Unit - BOSCH EDC16 - Tested Version for now : Fiat Croma, Alfa 159, Fiat 16, New Fiat Bravo 1.6 JTD, New Lancia Delta 1.6 JTD, Alfa GTV 1.9 JTD
  • ECU immo status - Marelli IAW59F, IAW4AF, IAW4EF, IAW5AF, IAW5AM, IAW5NF, MJD6JF 
    Added odometer correction by OBDII - Fiat Stilo 2001+ 
  • Scan for Units
  • IAW59FHW603 - Read/Program Eeprom. Virgin preparation. Free for all owners of FN004
  • Added DTCs in 18 languages: English, Italian, Russian, Brazilian, Croatian, Czech, Danish, Dutch, French, German, Greek, Hungarian, Polish, Portuguese, Slovenian, Spanish, Swedish, Turkish
  • BCM Read/Write EEPROM via OBDII. 
    Supported units:
       - BCM Delphi (93C66) - NOTE: PIN Code is required!
       - BCM Marelli (912DG128, 3K91D)
       - BCM Marelli (9S12DG256, 1K79X)
       - BCM Marelli (NEC 70F3237)
       - BCM Siemens (9S12DG128)
    * Marelli IAW 59M - Make virgin. Free for all owners of FN010
    * Marelli IAW 5SF8 (CAN) - Improved Read/Write EEPROM. Free for all owners of FN010
    * Marelli IAW 5SF9 (CAN) - Read/Write EEPROM, Make Vrigin. Free for all owners of FN010
    * Marelli MJD 8F2 (Kline) - Read/Write EEPROM. Free for all owners of FN010

 

Updated Special functions - prices

AVDI
Price is without VAT/Tax
For using this part of the site you must agree with new GDPR terms. Click here for more information.

- The set consist of “AVDI diagnostic interface”, PC-Windows based software with general diagnostic functions such as displaying/clearing DTCs, measured values (live data) display, actuator tests and basic coding/configuration functions. Covered vehicle brands are Audi, Volkswagen, Seat, Skoda, Bentley, BMW, Mini, Porsche, Opel, Vauxhall, Toyota, Lexus, Scion, Mercedes, Smart, Maybach, Renault, Mitsubishi, Hyundai, Kia, Fiat, Alfa, Lancia, Peugeot, Citroen, Chrysler, Jeep, Dodge, Ford, Mazda, Volvo. PassThru (SAE J2534) compatible driver will allow usage of 3-rd party software provided by the vehicle manufacturers ( i.e .IDS - Land Rover /Jaguar, Techstream – Toyota /Lexus / Scion, GDS2 and Tech2Win – GM/OPEL, BMW, Mini, Volvo ….). Some special diagnostic functions are included in the package such as updating flashing counters in the ECUs EDC16 (VAG - AN008), TV on/off configuration (VAG – AN011), access/update to the flash memory of ECU (VAG EDC15/EDC16 – AN015) When buying the AVDI interface you will receive one year free updates of all applications from the basic diagnostic suite.

For using this part of the site you must agree with new GDPR terms. Click here for more information.

- 12 months access to the latest software releases and online services

Your initial purchase of AVDI interface includes one year software update of the basic diagnostic suite, tools and our online services. To keep up to date your software applications and maintain usage of our online services we recommend the Annual Maintenance Subscription. Annual Maintenance Subscription is a renewable one year subscription. Annual Maintenance Subscription does not provide any support coverage this is provided separately by the Support Plan.

Activate AMS is required to purchase additional special functions

For using this part of the site you must agree with new GDPR terms. Click here for more information.

- 12 months support by email (required after expiration of the first year support included in AVDI package).

Clear step by step articles of AVDI procedures from a user perspective. Support desk manned by top AVDI professionals and fully integrated with the development team.

Support Plan can only be used with activated Annual Maintenance Subscription (AMS)

Special functions
Price is without VAT/Tax
For using this part of the site you must agree with new GDPR terms. Click here for more information.

Update of Instrument Cluster working data

Calibration by OBDII in cluster of CAN based vehicles:

Albea

Alfa 147

ALfa 159

Alfa Giulietta

Alfa MiTo

Bravo 2005+

Croma 2006+

Doblo

Doblo 2009+

Ducato 2006 - 2011

Ducato 2011+

Fiat 500

Fiorino

Ford Ka

Grande Punto

Idea

Lancia Delta 2008+

Lancia Musa 2006+

Lancia Y

Lancia Ypsilon 2012

Linea

Maserati Quattro porte 2005, 2006

Palio

Panda

Punto

Punto Evo

Siena

Stilo 2001+

Strada

 

Calibration of Engine Control Unit - BOSCH EDC16 - Tested Version for now : Fiat Croma, Alfa 159, Fiat 16, New Fiat Bravo 1.6 JTD, New Lancia Delta 1.6 JTD, Alfa GTV 1.9 JTD

 New AVDI Interface or activate AMS is required to purchase this special functions.

For using this part of the site you must agree with new GDPR terms. Click here for more information.

Reading and Updating ECU’s configuration memory by diagnostic. Reset to factory new state option. ECUs supported: EDC15C5, EDC15C7, MJD 6JF/8F2; Marelli IAW 4AF, 4EF, 59F, 5AF, 5AM, 5NF, 5SF3, 8GMF, 8GSF; BOSCH ME7.3H4 (boot), ME7.3.1 (boot), ME7.2.1 (boot)

Read/update memory, Calibration by OBDII of Engine Control Unit - EDC15C5(EURO2), EDC15C7(EURO3). This model ECU have the following vehicles:

Alfa 145 - 1.9 JTD

Alfa 146 - 1.9 JTD

Alfa 147 - 1.9 JTD 16V ; 1.9 JTD 8V

Alfa 156 - 1.9 JTD ; 2.4 JTD

Alfa 166 - 2.4 JTD

Fiat Bravo - 1.9 JTD

Fiat Brava - 1.9 JTD

Fiat Doblo - 1.9 JTD

Fiat Ducato - 2.0 JTD ; 2.3 JTD ; 3.8 JTD

Fiat Marea - 1.9 JTD ; 2.4 JTD

Fiat Marengo - 1.9 JTD

Fiat Multipla - 1.9 JTD

Fiat Punto - 1.9 JTD

Fiat Palio - 1.9 JTD

Fiat Stilo - 1.9 JTD

Fiat Siena - 1.9 JTD

Fiat Scudo - 2.0 JTD

Lancia K - 1.9 JTD

Lancia Lybra - 1.9 JTD ; 2.4 JTD

Lancia Thesis - 2.4 JTD

Lancia Z - 1.9 JTD

 

 

 


Read/update memory, Calibration, Make VIRGIN by OBDII of Engine Control Unit - Marelli Multijet MJD 6JF. This model ECU have the following vehicles:

Fiat new Panda - 1.3 IAW Multijet MJD 6JF

Fiat Idea - 1.3 IAW Multijet MJD 6JF Fiat Doblo - 1.3 IAW Multijet MJD 6JF Fiat Punto - 1.3 IAW Multijet MJD 6JF
Fiat Grande Punto - 1.3 IAW Multijet MJD 6JF Fiat Cinquecento - 1.3 IAW Multijet MJD 6JF Lancia Musa - 1.3 IAW Multijet MJD 6JF Lancia Ypsilon - 1.3 IAW Multijet MJD 6JF


Read/Update ConfData, Make VIRGIN by OBDII of Engine Control Unit - Marelli IAW 4AF/4EF/59F/5AF/59AM/59M/5NF; IAW 5SF3/5SF8 (Kline/CAN); 5SF9 (CAN); 8GMF; 8GSF; MJD 6JF (Kline); MJD 6F3 (Kline/CAN); MJD 8F2 (Kline/CAN); Bosch ME7.3H4 (BOOT MODE); Bosch ME7.3.1 (BOOT MODE)

New AVDI Interface or activate AMS is required to purchase this special functions.

For using this part of the site you must agree with new GDPR terms. Click here for more information.

Full set of special functions for FCA. ZN002 - PROTAG Programmer is required for key programming

For using this part of the site you must agree with new GDPR terms. Click here for more information.

Key programming. Transponders/Keys preparation. BCM - Configuration data read and update, PIN, component protection data display. Remote control programming. Includes support for Alfa Romeo Giulia/Stelvio

For using this part of the site you must agree with new GDPR terms. Click here for more information.

Aligns the vehicle configuration from the BCM to all the other related modules.

For using this part of the site you must agree with new GDPR terms. Click here for more information.

Key programming. Transponders/Keys preparation. BCM - Configuration data read and update, PIN, component protection data display. Remote control programming. Includes support for Alfa Romeo Giulia/Stelvio and vehicles with mechanical Megamos AES keys. (FIAT Tipo, Egea, 500X, Toro, Argos, Cronos, Jeep Renegade, Jeep Wrangler) and FIAT vehicles 2021/22 with MOPAR BCM (Alfa Romeo Giulia/Stelvio, Jeep Compass/Renegade, Fiat 500X, Jeep Wrangler/Gladiator, Dodge RAM and others)





Total quantity:
Total quantity:
Serial key:
Attention! - Serial key is for cases when you have main product. If you haven't main product, buy it first.
Quantity to remove: