Edilock Ltd company specialize in developing of car diagnostics software, key programming and immobiliser pin code reading devices, odometer correction software and devices for bypassing the immobilizer of petrol and diesel cars from VAG Group and in production of Locksmith tools for car opening, destructive and none destructive lock opening and decoding of all kind of locks. All our products are genuine and we do not sell chinese copies. Most popular products are BMW Key Programming Device for CAS 3 module via OBD II for all E - series 2004 - 2013, AVDI hardware and special software functions , Toyota Key programming via OBD II, TANGO Programmer, OMEGA - ORANGE Programmer, TAG Key Tool, BMW EWS 3 Key programming Device, VAG Pin Code Reading, DASHCODER - Odometer programming tool and more...
All devices are sold for official use only!!! If you use them for any illegal purposes, this is your own responsibility !!!

Commander Software for PSA Group Cars V6.11





More info>>>

Features:

  • PIN code reading via OBDII ( CAN BUS)
  • Odometer correction via OBDII in BSI module for CAN BUS vehicles
  • Instrument cluster mileage recalibration by OBDII for CAN bus vehicles 2005-2008 year
  • Key learning
  • Identification reading of various CAN modules
  • Reading and Clearing DTC's
  • Read/Write eeprom from EDC15
  • Read/Change Service list
  • Immobilizer Enable/Disable
  • Read PIN/Change PIN
  • EDC16 Flash read/write
  • Instrument cluster mileage recalibration - Citroen C5 2008+, Citroen C2 via OBDII
  • Read/Write Full EEPROM of Dashboard - Citroen C5 2008+, C2 via OBDII
  • Read/Write Full EEPROM of BSI Siemens via OBDII
Supported Vehicles for Mileages correction:

Peugeot 207
Peugeot 208
Peugeot 307 2005+
Peugeot 308
Peugeot 407
Peugeot 607 2006+
Peugeot 807 2006+
Peugeot Partner 2008+

Citroen C2
Citroen C3 II 2005+
Citroen C4
Citroen C4 Picasso
Citroen C5 II 2007+
Citroen C6
Citroen Berlingo 2008+
Supported Vehicles for Immo Pin Code reading:

Peugeot 206 (1,4 HDI, 2.0 HDI)*
Peugeot 207
Peugeot 208 with Valeo BSI (UDS)
Peugeot 2008 with Valeo BSI (UDS)
Peugeot 301 with Valeo BSI (UDS)

Peugeot 306 (2.0 HDI)*
Peugeot 307 (2.0 HDI)*
Peugeot 307 2005+
Peugeot 308
Peugeot 406 (2.0 HDI)*
Peugeot 407
Peugeot 607 2006+
Peugeot 807 2006+
Peugeot 1007 (1.4 HDI)*
Peugeot Partner (2.0 HDI)*
Peugeot Partner 2008+
Peugeot Ranch (2.0 HDI)*

Citroen C2
Citroen C3 (1.4 HDI)*
Citroen C3 II 2005+
Citroen DS3
Citroen C4
Citroen C4 Picasso
Citroen C5 (2.0 HDI)*
Citroen C5 II 2007+
Citroen C6
Citroen C8 2007+
Citroen C-Elysee with Valeo BSI (UDS)

Citroen Picasso (2.0 HDI)*
Citroen Xantia (2.0 HDI)*
Citroen Xsara (2.0 HDI)*
Citroen Xsara Picasso (2.0 HDI)*
Citroen Saxo (1.4 HDI)*
Citroen Berlingo (2.0 HDI)*
Citroen Berlingo 2008+

* Only with special fucntion PN010
 
AVDI
Price is without VAT/Tax
888 EUR
Qty: | Add to cart

- The set consist of “AVDI diagnostic interface”, PC-Windows based software with general diagnostic functions such as displaying/clearing DTCs, measured values (live data) display, actuator tests and basic coding/configuration functions. Covered vehicle brands are Audi, Volkswagen, Seat, Skoda, Bentley, BMW, Mini, Porsche, Opel, Vauxhall, Toyota, Lexus, Scion, Mercedes, Smart, Maybach, Renault, Mitsubishi, Hyundai, Kia, Fiat, Alfa, Lancia, Peugeot, Citroen, Chrysler, Jeep, Dodge, Ford, Mazda, Volvo. PassThru (SAE J2534) compatible driver will allow usage of 3-rd party software provided by the vehicle manufacturers ( i.e .IDS - Land Rover /Jaguar, Techstream – Toyota /Lexus / Scion, GDS2 and Tech2Win – GM/OPEL, BMW, Mini, Volvo ….). Some special diagnostic functions are included in the package such as updating flashing counters in the ECUs EDC16 (VAG - AN008), TV on/off configuration (VAG – AN011), access/update to the flash memory of ECU (VAG EDC15/EDC16 – AN015) When buying the AVDI interface you will receive one year free updates of all applications from the basic diagnostic suite.

240 EUR
Qty: | Add to cart

- 12 months access to the latest software releases and online services

Your initial purchase of AVDI interface includes one year software update of the basic diagnostic suite, tools and our online services. To keep up to date your software applications and maintain usage of our online services we recommend the Annual Maintenance Subscription. Annual Maintenance Subscription is a renewable one year subscription. Annual Maintenance Subscription does not provide any support coverage this is provided separately by the Support Plan.

Activate AMS is required to purchase additional special functions

180 EUR
Qty: | Add to cart

- 12 months support by email (required after expiration of the first year support included in AVDI package).

Clear step by step articles of AVDI procedures from a user perspective. Support desk manned by top AVDI professionals and fully integrated with the development team.

Support Plan can only be used with activated Annual Maintenance Subscription (AMS)

Special functions
Price is without VAT/Tax
400 EUR
Qty: | Add to cart

Allows you to read and write the EEPROM of the EDC15, EDC17(BOOT MODE), SID201, SID801, SID801A, SID802, SID803, SID803A, SID804, SID806;

Reading and modifying mileage in the dashboard of EDC16, EDC17(BOOT MODE), SID201, SID801, SID801A, SID802, SID803, SID803A, SID804, SID806;

Allows you to read and change the PIN of EDC15, SID201, SID801, SID801A, SID802, SID803, SID803A, SID804, SID806;

Allows you to modify the service intervals of EDC15, SID201, SID801, SID801A, SID802, SID803, SID803A, SID804, SID806;

Allows you to read and write the EEPROM of EDC15 Engine ECUs and make Immo OFF,as well as after sales and edit service list.

Supported models are all models using the following electronic cotrol units: EDC15, EDC16, EDC17, SID201, SID801, SID801A, SID802, SID803, SID803A, SID804, SID806.

This function can be used independently.

New AVDI Interface or activate AMS is required to purchase this special functions.

 
1400 EUR
Qty: | Add to cart

With this special function you can read and and calibrate the mileage stored in the BSI module and remove the synchronization with the instrument cluster (i.e. The modification is performed in the BSI exclusively and after a complete ignition cycle the mileage is not restored to the original value). In the cases where the sync removal does not apply it can calibrate the mileage in the cluster exclusively. Supported models are all CAN and UDS protocol models which includes almost all models produced after 2004. This function can be used independently.

 

Supported Vehicles for Calibration: 

Peugeot

Citroën

1007207307 2005+208 2012+2008 2013+301 2012+Citroën Berlingo 2008+30830085085008407607 2006+807 2006+Expert IIPartner 2008+

C-Elysee 2012+C2C3 2006+C3 IIDS3C4C4 PicassoC4 IIDS4C5 2004+C5 II 2007+DS5C6C8 2007+Jumpy IILancia Phedra 2008+

BSI Exchange - allows you to read the whole content of the one BSI (JCI or Valeo CAN) and transfer it to another one. It is very important to use the same hardware type for the replacement BSI. The Valeo BSIs are two types - the old one is thick, while the new one is thin, so they can’t be mistaken. To use this special function you need to have PN012 + PN013 special fucntions. The UDS BSI modules are supported via read/write EEPROM and flash.


New AVDI Interface or activate AMS is required to purchase this special functions.

1400 EUR
Qty: | Add to cart

With this special function you can read PIN codes from the BSI module. Supported models are all CAN and UDS protocol models which includes almost all models produced after 2004This function can be used independently.

Supported models for PIN code reading : 

Lancia Phedra 2008+

Peugeot

Citroën

1007206 (1,4 HDI, 2.0 HDI)*207306 (2.0 HDI)*307 (2.0 HDI)*307 2005+208 2012+2008 2013+301 2012+30830085085008406 (2.0 HDI)*407607 2006+807 2006+Expert IIPartner (2.0 HDI)*Ranch (2.0 HDI)*Partner 2008+

C2C3 (1.4 HDI)*C3 2006+C3 IIDS3C4C4 PicassoC4 IIDS4C5 (2.0 HDI)*C5 2004+C5 II 2007+DS5C6C8 2007+Jumpy IIXsara (2.0 HDI)*Xsara Picasso (2.0 HDI)*Saxo (1.4 HDI)*Berlingo (2.0 HDI)*Berlingo 2008+Xantia (2.0 HDI)*Picasso (2.0 HDI)*C-Elysee 2012+

The key learning function can be used only if the PIN code is already known. If the read security code operation was previously completed correctly, KeyLearning procedure can take the already retrieved PIN code, otherwise you have to enter the PIN code manually.

New AVDI Interface or activate AMS is required to purchase this special functions.

195 EUR
Qty: | Add to cart

Software update  for PN006 to PN009

New AVDI Interface or activate AMS is required to purchase this special functions.

150 EUR
Qty: | Add to cart

Software update  for PN008 to PN009

New AVDI Interface or activate AMS is required to purchase this special functions.

400 EUR
Qty: | Add to cart

Software update  for PN011 to PN013

New AVDI Interface or activate AMS is required to purchase this special functions.

400 EUR
Qty: | Add to cart

Software update  for PN010 to PN014

New AVDI Interface or activate AMS is required to purchase this special functions.





Turbo Decoder for Fiat, Lancia, Citroen, Peugeot, Iveco, Ford Ka with SIP 22 key profile 


  

This tool is specialy designed to open the door locks and ignition lock of different vehicles in non destructive way. After you decode and open the lock then you can read the key combination from the tool and cut a key that will open and close the locks and will turn the ignition.

Warranty only after personal training from an authorized dealer or manufacturer.

ABARTH
500 - from 2008
Grande punto - from 2007  to 2010
Punto Evo - from 2010
 
ALFA ROMEO 
156 - from 2001  to 2003
156 Sport W. - from 2001  to 2007
166 - from 2004  to 2008
Giulietta - from 2010
Mito - from 2008
 
CITROEN
Jumper - from 2006
Nemo - from 2008
Relay - from 2006
 
FIAT
500 - from 2007
Bravo - from 2007
Doblo - from 2006
Fiorino - from 2007
Grande Punto - from 2005
Idea - from 2009
Panda - from 2002
Punto Evo - from 2009
Qubo - from 2008
 
FORD EU
KA - from 2009
 
IVECO
Eurocargo - from 2002 to 2007
Stralis - from 2002 to 2007
 
LANCIA
Delta - from 2008
Musa - from 2009
Ypsilon - from 2011
 
PEUGEOT
Bipper - from 2009
Boxer - from 2006

Price: 750 EUR





 Turbo Decoder for PSA Group Vehicles with HU83 Key Profile 

  


Price: 750 EUR





Peugeot/Citroen Group Key Programming Device and Software 



     With this device you can program new keys without the need of a Immobilizer pin code and the whole programming is done via OBD II. The device has an USB port and the possibility to work with special software for Laptop/PC. Very easy to use and only need to plug the device in the OBD II port and press the programming button! This is an unique 2 - in - 1 device and software.

Features:

  • PIN code reading - the device will read the PIN code necessary for immobiliser key programming directly from the car BSI module via OBD II. No more need to disassembly the BSI or ECU for reading the pin code.
  • With the special software you can program up to 5 keys/remote controls when the PIN code is already known/availble for the car.
  • Automatic updates via Internet.

 

 Supported Peugeot models:  Supported Citroen models:
 
  • 1007 - 2007+
  • 207
  • 307 - 2005 +
  • 308
  • 3008
  • 407 - 2006 +
  • 5008
  • 508 with Continental BSI
  • 607 - 2005 +
  • 807 - 2006-2010
  • Partner/Partner Tepee - 2008+
  • RCZ
  • Expert/Expert Tepee
 
  • C2 2007+
  • C3 II 2005+
  • C3 Pluriel 2007+
  • C3 Picasso
  • DS3
  • C4 2005+
  • C4 2010+
  • C4 Picasso
  • C5 2005+
  • C6 2006+
  • C8 2008 +
  • DS4
  • DS5
  • Berlingo 2008+
  • Jumpy 2008+

Price: 2400 EUR

Special offers:
Turbo Decoder for PSA Group Vehicles with HU83 Key Profile + Peugeot/Citroen Group Key Programming Device and Software
3000 EUR
Qty: | Add to cart

Special offer on Peugeot/Citroen Group Key Programming Device and Software + Turbo Decoder for PSA Group Vehicles with HU83 Key Profile just for 3000 EUR. Normal price is 3150 EUR and you save 150 EUR with our special offer!





EN
NL
Total quantity:
Total quantity:
Serial key:
Attention! - Serial key is for cases when you have main product. If you haven't main product, buy it first.
Quantity to remove: