Edilock Ltd company specialize in developing of car diagnostics software, key programming and immobiliser pin code reading devices, odometer correction software and devices for bypassing the immobilizer of petrol and diesel cars from VAG Group and in production of Locksmith tools for car opening, destructive and none destructive lock opening and decoding of all kind of locks. All our products are genuine and we do not sell chinese copies. Most popular products are BMW Key Programming Device for CAS 3 module via OBD II for all E - series 2004 - 2013, AVDI hardware and special software functions , Toyota Key programming via OBD II, TANGO Programmer, OMEGA - ORANGE Programmer, TAG Key Tool, BMW EWS 3 Key programming Device, VAG Pin Code Reading, DASHCODER - Odometer programming tool and more...
All devices are sold for official use only!!! If you use them for any illegal purposes, this is your own responsibility !!!

BMW and Mini Cooper key/transponder programming device via OBD II - 2004 - 2013 V15.2
for
E60/ E61 /E63 /E64/ E65/ E70/ E71/ E84/ E87/ E90/ E91/ E92/ E93

Click here to see  how to program BMW X5 (E70)>>>

This new special device for BMW and Mini Cooper key and transponder programming for CAS module was developed to work via OBD II and also you can prepare on site keys or transponders with the device for programming to the car as the device consists of a car programmer and Hi Tag II key programmer. With this new Device when you program the keys via OBD II, the existing/old keys will not be erased and you will be able to use them again. The Device will program the remote control automatically at all available frequencies for Europe, North/South America, Africa and ASIA. The Device is powered up from the OBD II connector of the car. The Device is very useful for Auto Locksmiths, Auto engineers and Special Police Agencies!!
The device works with the latest BMW software ISTA V45/46/47/48/49/50/51/52/53/54/55/56/57 for CAS 3/3+
 
Note: The new update V11.0 includes solution for MEVD17.2 DME for X5 and X6 with new sw ISTA 50 - ISTA 55 for reading DME_SK for key programming, if you program a new remote key/transponder to one BMW/Mini Cooper car with our device then you can use the same key again to program it on another car or it can be cleared with our device only and restore it in blank state. Also, the programming of new key for updated BMW vehicles where flashing is needed is reduced to 6 min. 

Price: 3500 EUR

Special offers:
BMW Key Programming Device + HU92 Turbo Decoder for BMW, MINI, ROVER and SCANIA
4000 EUR
Qty: | Add to cart

Special offer on BMW Key Programming Device + HU92 Turbo Decoder for BMW, MINI, ROVER and SCANIA just for 4000 EUR. Normal price is 4250 EUR and you save 250 EUR with our special offer!





BMW and Mini Cooper mobile key/transponder programming device via OBD II - 2004 - 2013 V15.2 
for
E60/ E61 /E63 /E64/ E65/ E70/ E71/ E84/ E87/ E90/ E91/ E92/ E93

 

 

 

      In 2017 year we will celabrate the 10th Aniversary of our BMW Key Programming device and for this reason we are releasing our new special mobile device for BMW and Mini Cooper key and transponder programming for CAS module which was developed to work via OBD II and also you can prepare on site keys or transponders with the device for programming to the car as the device consists of a car programmer and Hi Tag II key programmer. With this new Device when you program the keys via OBD II, the existing/old keys will not be erased and you will be able to use them again. The Device will program the remote control automatically at all available frequencies for Europe, North/South America, Africa and ASIA. The Device is powered up from the OBD II connector of the car. The Device is very useful for Auto Locksmiths, Auto engineers and Special Police Agencies!!
The device works with the latest BMW software ISTA V45/46/47/48/49/50/51/52/53/54/55/56/57 and up till the latest one for CAS 3/3+
 
     Note: The new update V11.0 includes solution for MEVD17.2 DME for X5 and X6 with new sw ISTA 50 - ISTA 55 and up for reading DME_SK for key programming, if you program a new remote key/transponder to one BMW/Mini Cooper car with our device then you can use the same key again to program it on another car or it can be cleared with our device only and restore it in blank state. Also, the programming of new key for updated BMW vehicles where flashing is needed is reduced to 6 min. 

Price: 5000 EUR

Special Offers:
BMW and Mini Cooper mobile key/transponder programmer via OBD II - 2004 - 2013
5500 EUR
Qty: | Add to cart

Special offer on BMW Mobile Key Programming Device + HU92 Turbo Decoder for BMW, MINI, ROVER and SCANIA just for 5500 EUR. Normal price is 5750 EUR and you save 250 EUR with our special offer!





Hi Tag 3 PRO universal transponder programmer 

     

      This programmer is made for programming Hi Tag 3 (Hi Tag PRO) based transponders or original keys with such transponder. Hi Tag 2 transponder was replaced  by the new generation Hi Tag 3 transponder which is now used in the security immobilizer system of the new generation vehicles. This programmer works by eeprom dump. You must read the eeprom with a specialized eeprom programmer for security Motorola processors in circuit and then load the eeprom dump to the Hi Tag 3 Programmer in order to generate a new working key! No need to modify the eeprom dump as you will prepare the new key to start the vehicle direct!

      For now the Hi Tag 3 programmer supports BMW F series cars equipped with CAS4 Immobilizer module based on 9S12XDP512/9S12XEP100 Motorola MCU’s from 2009 to 2015 year PORSCHE vehicles like new Cayenne, Panamera and 911 with the new smart key all models till 12.2014. The software for Porsche models costs 3500 EUR( it is paid extra).

 


Main functions

  

BMW F series CAS 4 key maker

 

BMW F series CAS 4 information

  

BMW F series key info

  

BMW F series brand new key

 

 

 

List of supported transponders: 

    Philips transponders

PCF7936 writing, reading, modes password, crypto, Manchester & Biphase encodings 
PCF7941 transponder, remote, eeprom, Manchester & Biphase encodings 
PCF7942 transponder, remote, eeprom, Manchester & Biphase encodings 
PCF7943 transponder, remote, Manchester & Biphase encodings 
PCF7944 transponder, remote, eeprom, Manchester & Biphase encodings 
PCF7945 transponder, remote, eeprom, Manchester & Biphase encodings 
PCF7946 transponder, remote, Manchester & Biphase encodings 
PCF7947 transponder, remote, eeprom, Manchester & Biphase encodings 
PCF7952 transponder, remote, eeprom, Manchester & Biphase encodings 
PCF7961 transponder, remote, Manchester & Biphase encodings 
*Autodetect between PCF7936 … PCF7961.
*Autodetect manchester / biphase


Price: 3000 EUR





BMW Commander 30.8

Diagnostic tool for BMW (E3x, E46, E53, E6x, E70, E8x, E9x and Fxx)
Now covering models from 1996 till 2016 year (including) with K-line/CAN BUS/ KWP2000/DS2 communication protocol

      ABRITES Diagnostics for BMW, MINI is a PC - Windows based diagnostic software for dealer level access to the vehicle (identification, trouble codes and s.o.), calibration, key programming, programming vehicle order. Tool can access CAS1, CAS2, CAS3 and CAS3+ by OBDII independend from the firmware of the CAS. Also you can perform unusual for for other diagnostic tools operations with the electronic modules inside of the vehicle like programming Vehicle Order and Coding of electronic control units. Access to the memory of the units in the vehicle. Covers vehicles BMW series starting from E36 up to latest models F series (F01,F10,F20,F25 and s.o.). 

       Functions included in the base package (AVDI interface):

  • Identification (VIN, mileage, production data)
  • Read and clear diagnostic trouble codes (current, history and shadow)
  • Added DTCs in 17 languages: English, German, French, Thai, Swedish, Italian, Spanish, Indonesian, Korean, Greek, Turkish, Chinese, Chinese traditional, Russian, Dutch, Portuguese, Japanese. DTC conditions information (Odometer value, Timestamp, full engine status report for EDC17)
  • Some DTCs (mostly those of the F series) are given detailed documentation of what caused the problem and how the problem should be handled
  • Measured values/live data
  • Entering and leaving from logistic mode of the modules in the vehicle
  • Synchronization DME/DDE and EWS/CAS, CAS and ELV
  • Enable / Disablie of the keys
  • Enable / Disablie of TV function for E3x,E46,E5x,E83,E85,E86 (for the next bodies available via unit coding)
  • Ability for diagnostic on internal CAN buses
  • Displaying KEY CUTTING code (mechanical code) stored in CAS modules
  • EBRIDGE/Passthru - Compatibility with BMW - E-Sys, DIS, INPA, EDIABAS, NCS Expert, NFS over K-line and CAN bus

       Special functions:

              Car Access System Advanced Coding - Programming identification of the units, user information fields, read/write memory of the units 
Programming keys for vehicles equipped with CAS1/CAS2/CAS3/CAS3+ by OBDII or cas/dash plug. Programming mileage stored in CAS1/CAS2/CAS3/CAS3+ by OBDII. Read/update ConfData of CAS2/CAS3 by cas/dash plug

  • Programming identification of the modules in the vehicle *
  • Programming User Information Fields in the electronic modules * 
  • Read / Write of memory of the electronic control modules *
  • Program mileage stored in CAS1, CAS2 and CAS3 by OBDII
  • Program keys by OBDII - CAS1, CAS2 and CAS3 systems - support latest versions CAS3 updated in 2013 year
  • Key programming for CAS3+ with latest firmware version (ISTA-P 48)
  • Read / Update ConfData from CAS1 via OBDII
  • Read / Update ConfData from CAS2/CAS3 via dash connector or cas-connector
  • Read / Calibrate data stored in different electronic control units by OBDII like ECU, EGS, SGM, JBBF and many others
  • Extracting and programming syncrhonization code between ECU and CAS by OBDII
  • Ability to works together with transponder programmer 
    * Not granted for all type of control modules.

           * Electronic Gearbox System synchronization - Perform synchronization/recovery between CAS, EGS and ECU

           Advanced Coding Functionality - Reading and programming vehicle order data, reprogramming flash memory of all electronic 
control units,E-series unit coding

  • Service intervals/CBS - ability for programming of service counters by OBDII
  • Programming flash memory of all elcronic control units by OBDII (can be used directly datbases released from BMW)
  • Read and Program Engine Control Unit flash memory for tunning purposes by OBDII
  • Programming Vehicle Order data (you can add new units to configuration of the vehicle) - E body
  • Coding (configuration) of each electronic control unit in the vehicle - E body
  • Read / Update mileage from the IKE, LCM, EWS, ECU, ABS, VTG, EGS (please refer covarage list)
  • Manager of service intervals, reset service reminders (CBS)

           Key Preparation by dump of CAS4 - Preparing a keys by dump for BMW models with CAS4 - newest BMW 1, 3, 5 GT, 6, 7, X3 
series ( body Fxx)


 

More info>>>

 

Updated Special functions - prices

Price is without VAT/Tax
888 EUR
Qty: | Add to cart

- The set consist of “AVDI diagnostic interface”, PC-Windows based software with general diagnostic functions such as displaying/clearing DTCs, measured values (live data) display, actuator tests and basic coding/configuration functions. Covered vehicle brands are Audi, Volkswagen, Seat, Skoda, Bentley, BMW, Mini, Porsche, Opel, Vauxhall, Toyota, Lexus, Scion, Mercedes, Smart, Maybach, Renault, Mitsubishi, Hyundai, Kia, Fiat, Alfa, Lancia, Peugeot, Citroen, Chrysler, Jeep, Dodge, Ford, Mazda, Volvo. PassThru (SAE J2534) compatible driver will allow usage of 3-rd party software provided by the vehicle manufacturers ( i.e .IDS - Land Rover /Jaguar, Techstream – Toyota /Lexus / Scion, GDS2 and Tech2Win – GM/OPEL, BMW, Mini, Volvo ….). Some special diagnostic functions are included in the package such as updating flashing counters in the ECUs EDC16 (VAG - AN008), TV on/off configuration (VAG – AN011), access/update to the flash memory of ECU (VAG EDC15/EDC16 – AN015) When buying the AVDI interface you will receive one year free updates of all applications from the basic diagnostic suite.

240 EUR
Qty: | Add to cart

- 12 months access to the latest software releases and online services

Your initial purchase of AVDI interface includes one year software update of the basic diagnostic suite, tools and our online services. To keep up to date your software applications and maintain usage of our online services we recommend the Annual Maintenance Subscription. Annual Maintenance Subscription is a renewable one year subscription. Annual Maintenance Subscription does not provide any support coverage this is provided separately by the Support Plan.

Activate AMS is required to purchase additional special functions

180 EUR
Qty: | Add to cart

- 12 months support by email (required after expiration of the first year support included in AVDI package).

Clear step by step articles of AVDI procedures from a user perspective. Support desk manned by top AVDI professionals and fully integrated with the development team.

Support Plan can only be used with activated Annual Maintenance Subscription (AMS)

Special functions
Price is without VAT/Tax
1500 EUR
Qty: | Add to cart

Programming identification of the units, user information fields, read/write memory of the units
Programming keys for vehicles equipped with CAS1/CAS2/CAS3/CAS3+ by OBDII or cas/dash plug. Programming mileage stored in CAS1/CAS2/CAS3/CAS3+ by OBDII. Read/update ConfData of CAS2/CAS3 by cas/dash plug

  • Programming identification of the modules in the vehicle *
  • Programming User Information Fields in the electronic modules *
  • Read / Write of memory of the electronic control modules *
  • Program mileage stored in CAS1, CAS2 and CAS3 by OBDII
  • Program keys by OBDII - CAS1, CAS2 and CAS3 systems - support latest versions CAS3 updated in 2013 year
  • Key programming for CAS3+ with latest firmware version (ISTA-P 48)
  • Read / Update ConfData from CAS1 via OBDII
  • Read / Update ConfData from CAS2/CAS3 via dash connector or cas-connector
  • Read / Calibrate data stored in different electronic control units by OBDII like ECU, EGS, SGM, JBBF and many others
  • Extracting and programming syncrhonization code between ECU and CAS by OBDII
  • Ability to works together with transponder programmer
    * Not granted for all type of control modules.

New AVDI Interface or activate AMS is required to purchase this special functions.

* In order to use this function you have to buy the TAG PROG - ZN001

1000 EUR
Qty: | Add to cart

Perform synchronization/recovery between CAS, EGS and ECU


New AVDI Interface or activate AMS is required to purchase this special functions.

500 EUR
Qty: | Add to cart

Reading and programming vehicle order data, reprogramming flash memory of all electronic
control units,E-series unit coding

  •     Programming flash memory of all elcronic control units by OBDII (can be used directly datbases released from BMW)
  •     Read and Program Engine Control Unit flash memory for tunning purposes by OBDII
  •     Programming Vehicle Order data (you can add new units to configuration of the vehicle) - E body
  •     Coding (configuration) of each electronic control unit in the vehicle - E body
  •     Read / Update mileage from the IKE, LCM, EWS, ECU, ABS, VTG, EGS (please refer covarage list)
  •     Sensor calibrations
  •     Manager of service intervals, reset service reminders (CBS)
  •     FSC Code calculation for E and F-series

New AVDI Interface or activate AMS is required to purchase this special functions.

1500 EUR
Qty: | Add to cart

Preparing a keys by dump for BMW models with CAS4 - newest BMW 1, 3, 5 GT, 6, 7, X3 series ( body Fxx)


New AVDI Interface or activate AMS is required to purchase this special functions.

2500 EUR
Qty: | Add to cart

BMW  Light : BN010,11,12,KT010

New AVDI Interface or activate AMS is required to purchase this special functions.

3800 EUR
Qty: | Add to cart

BMW Full : BN010,11,12,13,KT010

New AVDI Interface or activate AMS is required to purchase this special functions.

400 EUR
Qty: | Add to cart

Key programming for BMW bikes by diagnostic

Read/Update ConfData by diagnostic link for the following immobilizers:
- MAGNETI MARELLI IMM003
- MAGNETI MARELLI IMM006
Read/Update ConfData by diagnostic link for the following ECUs:
- EFI TECHNOLOGY ACII/AC2I/AC5I/AC8I/AC13I/AC21I/AC23I
- EFI TECHNOLOGY AC19I/AC20I/AC25I/AC27I/AC32I
- MAGNETI MARELLI ACI100/ACI50x/ACI60x
- MAGNETI MARELLI IAW 15
- MAGNETI MARELLI IAW 5AM
- PHILIPS DiTECH
- Key programming Aprilia, Gilera, Piaggio

  

  

- Key programming of BMW bikes

  

- Key programming of BMW motorbike models with EWS 4 Immo by dump - R1200GS (2013+), C600 Sport/C600 GT (2012+), K1300R (2010+), K1600GT/GTL ( 2011+), F800GT/GSA (2013+)

   

  

 

- Key programming for bikes with MAGNETI MARELLI MIU1/MIU2/MIU4

 

New AVDI Interface or activate AMS is required to purchase this special functions.

1250 EUR
Qty: | Add to cart

Software update  for BN002 to BN010

New AVDI Interface or activate AMS is required to purchase this special functions.

1000 EUR
Qty: | Add to cart

Software update  for BN002+BN003 to BN010

New AVDI Interface or activate AMS is required to purchase this special functions.

900 EUR
Qty: | Add to cart

Software update  for BN002+BN003+BN004 to BN010

New AVDI Interface or activate AMS is required to purchase this special functions.

400 EUR
Qty: | Add to cart

Software update  for BN002+BN003+BN004 +BN006 to BN010

New AVDI Interface or activate AMS is required to purchase this special functions.

1000 EUR
Qty: | Add to cart

Software update  for BN006 to BN010

New AVDI Interface or activate AMS is required to purchase this special functions.





RADIO FREQUENCY DIGITAL SHIELD 2W + 2W + 1W

 

 

     With its small dimensions the RF-SHIELD DIGITAL is easy to handle. Furthermore it is flat and very efficient. More frequencies can be covered and several frequencies triggered.

     The device generate frequencies, which we program on relevant channels:
band 315MHz = 5 channels,
band 433MHz = 5 channels,
band 868MHz = 4 channels
and band 915MHz = 1 channel

     The device is factory-made preset to cover the most used frequencies that it can function even at channel hopping. At desire we also can program other frequencies.

     Direct channel hopping makes the device more efficient. Factory made programming for several channels is possible. Device can be charged through USB-socket.

 

Technical data

Frequencies : 315MHz, 433MHz, 868/915MHz
RF-power output : 2W + 2W + 1W
Current consumption : 1,2A
Power supply : integrated battery NiMh 7,2V , 1200mAh
Range : ca. 50m
Operating time : ca. 1h
Dimensions : 96x79x19,6mm
Weight : 280g

 


     This device is very suitable for Police and Government Agencies !!! This tool is sold under some restrictions for the different countries and you must specify for which country you want to order it so we can tell you if you can buy it from us!


Price: 2500 EUR





EN
NL
Total quantity:
Total quantity:
Serial key:
Attention! - Serial key is for cases when you have main product. If you haven't main product, buy it first.
Quantity to remove: